Trail-runner
New Member
Holans on the S10
Show Us Your Panniers
- Thread starter Motowalt
- Start date
Thanks for the pictures of the Black Holans. I ordered the same set up and UPS indicates mine should be delivered on Thursday. I really like the Black under the rear seat as well. Wish the 2013 white ones would have had black instead of silver.Trail-runner said:
oilfield_trash
Member
45L Holan Nomadas.
Jesse's with NONE exhaust.
http://www.flickr.com/photos/24707831@N04/8690126541/#sizes/k/in/photostream/
http://www.flickr.com/photos/24707831@N04/8690126541/#sizes/k/in/photostream/
Don in Lodi
Well-Known Member
Founding Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Nice! Did Jesse fix up a left rack for you or did you get to play?kakee said:
Don in Lodi
Well-Known Member
Founding Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Not a welder by trade I see. A+ for effort. ::008:: A one of a kind Tenere. I'm jealous.
E.Engler
New Member
Touratech Zega Pro Set-Up. Real nice quality boxes and rack.
Attachments
HDFlyer76
Member
SW Motech luggage racks and Trax Alu Boxes
Attachments
barkingllizard
Well-Known Member
a simple kudos to all previous thread posters, here are mine:
early on I decided the OEM boxes were enough for most everything I wanted to do, which they are,
and I like the clean uncluttered look when the boxes stay home.....
All of the yellow on the boxes is 3M Reflective.
I would like to add some footman loops, when I find them with a reasonable shipping charge,
$6.50 for loops and $30 for ground shipping is just plain wrong.
Maybe I will just ride to Where-Ever and buy them in store.
early on I decided the OEM boxes were enough for most everything I wanted to do, which they are,
and I like the clean uncluttered look when the boxes stay home.....
All of the yellow on the boxes is 3M Reflective.
I would like to add some footman loops, when I find them with a reasonable shipping charge,
$6.50 for loops and $30 for ground shipping is just plain wrong.
Maybe I will just ride to Where-Ever and buy them in store.
EricV
Riding, farkling, riding...
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Looking Good Barking Lizard. ::008::
On the footman loops, check out the local camping or hardware stores. I find them locally at good prices in with the RV supplies at our ACE hardware store. Perhaps Canadian Tire? Or if you have an RV dealer around that sells repair bits and accessories for the RV crowd? Often in Stainless steel and black.
On the footman loops, check out the local camping or hardware stores. I find them locally at good prices in with the RV supplies at our ACE hardware store. Perhaps Canadian Tire? Or if you have an RV dealer around that sells repair bits and accessories for the RV crowd? Often in Stainless steel and black.
AlsoRan
Member
Touratech Zega Pro's.
Attachments
Marine/boating supply places with a good hardware section will have them.EricV said:
Make sure you get the loops AND RIVETS which are not going to rust. btdt
cb0802
New Member
Does anyone make a full support mounting system for the OEM panniers?
I like the OEM boxes, but would prefer a sturdier mount. It seems all the aftermarket bags use a similar tube mount that supports the base of the pannier with full contact on the inside. OEM has 2 points of contact and nothing in the inside/rear. While this allows them to bend vs break in a fall, I have always wanted a sturdier platform to mount the bags.
I like the OEM boxes, but would prefer a sturdier mount. It seems all the aftermarket bags use a similar tube mount that supports the base of the pannier with full contact on the inside. OEM has 2 points of contact and nothing in the inside/rear. While this allows them to bend vs break in a fall, I have always wanted a sturdier platform to mount the bags.
Kiwi Graham
New Member
No pics yet but can if anyone wants.
Went with Givi Trekker 33 on the sides and a 46 on the top.
Looks nice and balanced, good quality boxes, easy on and off the bike and waterproof
I also like the little gizmo of being able to open a small section of the lid for the 'need every stop items' to save opening the whole case.
Went with Givi Trekker 33 on the sides and a 46 on the top.
Looks nice and balanced, good quality boxes, easy on and off the bike and waterproof
I also like the little gizmo of being able to open a small section of the lid for the 'need every stop items' to save opening the whole case.
Guinnessnl
New Member
Do you have a pic with the holand on bike with rear seat and if so could you post it please? Thanks. I want to get an idea of the amount of clearance for trunk.Trail-runner said:
Clifford
Member
Option one:
1960's era Shoei Fiberglass painted with Yamaha Paint to match. Oh and converted to LED lights too!
Option two:
Plano Large Pistol Cases.
I have four sizes of Panniers (5 if you count the Givi's on my Ducati) for my bikes and I've built or adapted all of them to fit the racks I've custom built for each bike. So they are all interchangeable! Depends on where I'm going and what I plan to haul as to which ones I mount. These two are the smaller sets! The others are a lot bigger!
1960's era Shoei Fiberglass painted with Yamaha Paint to match. Oh and converted to LED lights too!
Option two:
Plano Large Pistol Cases.
I have four sizes of Panniers (5 if you count the Givi's on my Ducati) for my bikes and I've built or adapted all of them to fit the racks I've custom built for each bike. So they are all interchangeable! Depends on where I'm going and what I plan to haul as to which ones I mount. These two are the smaller sets! The others are a lot bigger!
Ramseybella
Well-Known Member
I installed Happy Trails racks and Doskocil Camera Cases, made an Aluminum base for the tail case the extension is just one of the side case mounting plates.
But I did think of making a folding platform to make a small folding aluminum table for cooking or whatever that will slip under the top case.
But I did think of making a folding platform to make a small folding aluminum table for cooking or whatever that will slip under the top case.