Guys and Girls
I have an issue with my OEM heated grips on my 2015 Super T ES.
I lose the heated grips display intermittently. (Now it’s completely missing) I noticed it in the spring, but only now, in the fall decided to try to take care of this issue after reading the thread here.
At first, I ohmed out the right grey connector and it was completely open. The left black one read 2.4Ω.
I was happy that I only need to buy the right grip. Before putting things together again and after looking at the wires on the grip side (looks good) I decided to spray electric contact cleaner, loosen the zip ties, and shake the wires a bit. Used my voltmeter to check for ohms again and this time around I get the following.
- Left Black reads 2.4Ω. Spec from shop manual 1.21-1.48 Ω
- Right grey reads 1.8Ω. Spec from shop manual 1.17-1.43 Ω
I still don’t see the display of the heated grips.
I didn’t think that out of spec ohm readings would be the issue. I thought I would get a complete open.
Maybe I didn’t get a good reading first time around, but now I definitely do.
What are your thoughts?
Thank you,