fredz43
Well-Known Member
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Thanks for your help. Order successfully placed this morning.
10% off on all Super Tenere Aluminum ACD Racing Skid Plates forum members
- Thread starter acdracing
- Start date
tomatocity
Active Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Appreciate the Manufacturer and Distributor support on this forum. Not every product offers this.
::026::
::026::
Hi Nick,NickBrewer3 said:
I have your answer from the factory.
Unfortunately, there is no way to transform an ACD Racing Parts '10 to '13 Super tenere Skid plate to a '14 Super tenere Skid plate since holes position for screws and and bolts is a bit different so is the way angles are shapes.
Unless we open a used skid plate section on our http://www.acdracing.us web site, I won't be able to help.
ACD Racing Parts USA
http://www.acdracing.us
NickBrewer3
New Member
Thanks for checking into it for me, I will most likely purchase a 2014 skid plate in the near future from you and try to sell my 2013 skid plate locally, shouldn't be too hard, Super Tenere's are reasonably popular here.
What is the cost of a 2014 skid plate shipped to zipcode 99687 (Wasilla, Alaska)? Thanks!
What is the cost of a 2014 skid plate shipped to zipcode 99687 (Wasilla, Alaska)? Thanks!
Hi Nick,NickBrewer3 said:
We offer free shipping for continental U.S.. Sending the skid plate to Alaska would result in an additional 100 USD shipping fee.
ACD Racing Parts USA
http://www.acdracing.us
NickBrewer3
New Member
That is why I was hoping it was just an updated bracket...
You could ride your brand new 2014 Super Tenere to our offices in Chicago! If you do so, we invite you a lunch and a some beers!NickBrewer3 said:
Seriously, it results very expensive to ship to AK or HI and I admit it is rather unfair, being the same country. May be you have some family visiting you for Christmass we could ship to.
ACD Racing Parts USA
http://www.acdracing.us
Is your discount code still good? I tried to order a raw skid plate for a 2014 and it wouldn't take the code.
Thanks!
Thanks!
Hi,ohyeahsure said:
Yes off course it is active till november 30th, but you are right, 2014 Raw aluminum Super Tenere ACD Racing Parts Skid Plates was not included. The mistake is repaired. You can now use your STFORUM04B coupon code on this item also.
Tell us if any inconvinient.
ACD Racing Parts USA
http://www.acdracing.us
Great! It worked. Skid plate ordered, looking forward to installing it.
Good morning!
Every ACD Racing Parts Yamaha Super tenere XTZ1200 skid plate ordered has been shipped to our customers now. You can check the customer section of http://www.acdracing.us website for details.
We had some inconveniences due to the high level of orders and had to wait for the factory to deliver additional Super tenere Skid plates to us!
Please post photos of your bikes when you install your new protectors. You can also post pictures on our Facebook page if you wish: https://www.facebook.com/acdracingusa
To those who have not taken yet the opportunity to order their ACD Racing Parts Skid Plate for Yamaha Super tenere, the promo is still valid until November 30th 2014. Using the STFORUM04B coupopn code when ordering on http://www.acdracing.us you get 10% off on all ACD Racing Parts Super Tenere Skid Plates found in here: http://www.acdracing.us/yamaha-xt1200z-super-tenere-skid-plates/
And remember, we provide free shipping to continental U.S.!
ACD Racing Parts USA
http://www.acdracing.us
Every ACD Racing Parts Yamaha Super tenere XTZ1200 skid plate ordered has been shipped to our customers now. You can check the customer section of http://www.acdracing.us website for details.
We had some inconveniences due to the high level of orders and had to wait for the factory to deliver additional Super tenere Skid plates to us!
Please post photos of your bikes when you install your new protectors. You can also post pictures on our Facebook page if you wish: https://www.facebook.com/acdracingusa
To those who have not taken yet the opportunity to order their ACD Racing Parts Skid Plate for Yamaha Super tenere, the promo is still valid until November 30th 2014. Using the STFORUM04B coupopn code when ordering on http://www.acdracing.us you get 10% off on all ACD Racing Parts Super Tenere Skid Plates found in here: http://www.acdracing.us/yamaha-xt1200z-super-tenere-skid-plates/
And remember, we provide free shipping to continental U.S.!
ACD Racing Parts USA
http://www.acdracing.us
cosmic
Member
My skid plate after the impact...
Total loss or??
Total loss or??
Damn was this a crash or just lots of fun on some rocks! ::022::
cosmic said:My skid plate after the impact...
Total loss or??
OMG!cosmic said:My skid plate after the impact...
Total loss or??
I think the ACD Racing Parts Skid plate fulfilled with its function avoiding more serious damages to your Super Tenere.
What did you do to get that result? I think it's going to be difficult to repair the Skid plate as it received a lot of damage during the impact.
ACD Racing Parts USA
http://www.acdracing.us
Impressive, but I think you are shopping for a new skid plate. Maybe exhaust pipes too.
Nice work ::013::
Nice work ::013::
cosmic
Member
There was a report of this somewhere. Anyways, it was a fall, with some 30ft flight before the landing. I hit a solid stone hidden in the grass on the right side of the two track trail. Then came the flight, and the obvious landing on the left side.
I kind of landed on my buddy's bike who was half of the length behind me in the left track. I found the bike in third gear, which kind lf confirms the impact at approx. 70/80 km/h.
I took the plate off and found out it had a new baby bath shape.
This plate took a lot of beatings, but i suppose that this hit was one too much. I gave it to a friend of a friend to give a try. He's pretty busy guy, and i'm i no rush myself, cause i have a 2nd oem one for the time being.
I would like to have another one in raw aluminum, but it will have to wait, otherwise my wife will kill me.
As for the exhaust pipes, i fix them so the bike can breathe, but I'm aiming the Arrow ones.
I kind of landed on my buddy's bike who was half of the length behind me in the left track. I found the bike in third gear, which kind lf confirms the impact at approx. 70/80 km/h.
I took the plate off and found out it had a new baby bath shape.
This plate took a lot of beatings, but i suppose that this hit was one too much. I gave it to a friend of a friend to give a try. He's pretty busy guy, and i'm i no rush myself, cause i have a 2nd oem one for the time being.
I would like to have another one in raw aluminum, but it will have to wait, otherwise my wife will kill me.
As for the exhaust pipes, i fix them so the bike can breathe, but I'm aiming the Arrow ones.
Hi!cosmic said:There was a report of this somewhere. Anyways, it was a fall, with some 30ft flight before the landing. I hit a solid stone hidden in the grass on the right side of the two track trail. Then came the flight, and the obvious landing on the left side.
I kind of landed on my buddy's bike who was half of the length behind me in the left track. I found the bike in third gear, which kind lf confirms the impact at approx. 70/80 km/h.
I took the plate off and found out it had a new baby bath shape.
This plate took lot of beatings, but i suppose that this hit was one too much. I gave it to a friend of a friend to give a try. He's pretty busy guy, and i'm i no rush myself, cause i have a 2nd oem one for the time being.
I would to have another one in raw aluminum, but it will have to wait, otherwise my wife will kill me.
As for the exhaust pipes, i fix them so the bike can breathe, but I'm aiming the Arrow ones.
Ouch! Just reading it it hurts!
Tell us what your friend was able to do. If you need the rear bracket for the skid plate, we can provide it as spare part as it looks pretty twisted on pictures. And if you order a whole new skid plate, I swear we won't tell your wife!!
Cheers
ACD Racing Parts USA
http://www.acdracing.us
cosmic
Member
Good to hear you can sell the bracket. I think there's no way to fix it. It's completely out of shape. We'll see. I'll let you know how it went.
blakebird
New Member
Impressive job of protecting what it was supposed to protect...
I just ordered one and hope it never gets put to that much of a test
I just ordered one and hope it never gets put to that much of a test
fredz43
Well-Known Member
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
I received my ACD plate for my 14 ES. One note when installing this plate on a 14 is that with the larger cat convertor, you cannot slide out the centerstand bolt on the left side of the bike without loosening the exhaust system enough to clear. I removed the muffler and the bolt near the centerstand that holds the header and then loosened all the header bolts so that I could get enough movement to remove the bolt.
I am taking a break for the evening and will see if I can get some assistance tomorrow for what appears to be the most difficult part of the job, a part that was already done when they shot the video. I got the centerstand insert installed on the non spring side of the stand, but for the life of me, I can't get the one started on the side of the stand that has the springs. I'll see if I can get another pair of hands to try to wiggle the stand a bit while I pry it back and see if we can get that insert installed.
I am going to use studs instead of the engine mount bolts in front, and got very fast service from the vendor that BWC mentioned, Bel Metric. Thanks for that, Bernie.
Here is the tight fit on a 14.
I am taking a break for the evening and will see if I can get some assistance tomorrow for what appears to be the most difficult part of the job, a part that was already done when they shot the video. I got the centerstand insert installed on the non spring side of the stand, but for the life of me, I can't get the one started on the side of the stand that has the springs. I'll see if I can get another pair of hands to try to wiggle the stand a bit while I pry it back and see if we can get that insert installed.
I am going to use studs instead of the engine mount bolts in front, and got very fast service from the vendor that BWC mentioned, Bel Metric. Thanks for that, Bernie.
Here is the tight fit on a 14.