I know this is 'easy peasy' guys, but I'm bored, so bear with me. Got my SW Motech GPS holder in the mail from Twisted Throttle after about a 10 day wait (overseas shipment).
Remove windshield
Remove headlight shroud to expose upper headlight fixture mounting bolts.
Loosen all 3 of the gauge cluster mounting bolts enough to insert the bracket between the instument cluster and the aft side of the windshield mounting bracket.
Replace upper headlight fixture mounting bolts with the longer ones supplied by SW Motech (these will be the lower mounts for the GPS bracket).
The longer upper fixture bolts shown protruding through the lower mount point of the bracket
Supplied nuts for above bolts
Bolts for side mounting point of bracket
Removable portion of bracket on the verge of 'full insertion" aaaaaaah!!
Ready to rock-n-roll with car style GPS at 50+ yr old viewing distance 8) Water proofing via plastic bag or RAM box if I choose to bring it on a ride.
OBTW, I skipped taking a picture of removal of the cheesy cover that hides the back of the instrument panel. No biggie..just 3 of those plastic dowels to remove (push the center).
Remove windshield
Remove headlight shroud to expose upper headlight fixture mounting bolts.
Loosen all 3 of the gauge cluster mounting bolts enough to insert the bracket between the instument cluster and the aft side of the windshield mounting bracket.
Replace upper headlight fixture mounting bolts with the longer ones supplied by SW Motech (these will be the lower mounts for the GPS bracket).
The longer upper fixture bolts shown protruding through the lower mount point of the bracket
Supplied nuts for above bolts
Bolts for side mounting point of bracket
Removable portion of bracket on the verge of 'full insertion" aaaaaaah!!
Ready to rock-n-roll with car style GPS at 50+ yr old viewing distance 8) Water proofing via plastic bag or RAM box if I choose to bring it on a ride.
OBTW, I skipped taking a picture of removal of the cheesy cover that hides the back of the instrument panel. No biggie..just 3 of those plastic dowels to remove (push the center).