LOST A LOT OF COOLANT PARKED UP IN LAY BYE any ideas

[bimota]

Hello Rob, just my opinion, if you’re not handy with the spanners, take the forks out and drop them to a suspension specialist for a service and new seals/bushes. One of those “do it properly once” jobs. This place in Pontypridd looks and sounds well capable. https://moto-pro.co.uk/

Forks out is an easy and straightforward job. All torque settings are in my post in the relevant forum page. 45 mins out, same back in.

Note, I have no allegiance to that shop and take no responsibility for their work. But I’d let them do my forks if I was local.

i have the yamaha oem seals can you point me in the right direction for bushes, part numbers etc quantity

rob

 

[Boris]

i have the yamaha oem seals can you point me in the right direction for bushes, part numbers etc quantity

rob

I’m not 100% confident on which parts to advise, but have linked to the Gen1 forks fiche. Perhaps someone more knowledgeable can advise. I think number 5 are the bushes, you’d need one per leg. Note, I think.
In my experience, suspension specialist have stocks of various seals and bushes and may have suitable items.

FRONT FORK - Yamaha XT1200Z | Yamaha XT1200Z 2013 FRONT FORK with fast delivery to United States | Fowlers Parts

Yamaha XT1200Z | 2013 | Mat gray metallic 3 | belgium | FRONT FORK with fast delivery to United States. Available at Fowlers Parts, the UK's No.1 Motorcycle Parts Supplier.

www.fowlersparts.co.uk

 

[bimota]

at the moment i have 2 of 4DA-23144-L0 SEALS, 2 of 3XJ-23145-L0 DUST COVERS, 2 of 5EB-23171-00 BUSHES,

do i need any other bush as well

ROB

 

[bimota]

i,ve pm,d TABASCO for what bushes i need

rob

 

[Jiivee]

These ones...

 

[Boris]

These ones...
View attachment 101918

Those are number 5 on the fiche.

 

[Longdog Cymru]

Hello Rob, just my opinion, if you’re not handy with the spanners, take the forks out and drop them to a suspension specialist for a service and new seals/bushes. One of those “do it properly once” jobs. This place in Pontypridd looks and sounds well capable. https://moto-pro.co.uk/

Forks out is an easy and straightforward job. All torque settings are in my post in the relevant forum page. 45 mins out, same back in.

Note, I have no allegiance to that shop and take no responsibility for their work. But I’d let them do my forks if I was local.

Thanks for this Boris, I had no idea there was a suspension specialist so close!

 

[bimota]

These ones...
View attachment 101918

yep, thats the 2 i need to order then i have what i need cheers

 

[Jiivee]

yep, thats the 2 i need to order then i have what i need cheers

Yup. I ordered all those parts last week...