Found a broken shim when i pulled the tc clutch cover.
Attachments
-
35.9 KB Views: 222
Look at the end of the CCT. The one in the picture is off my 13 model and has 23P stamped on the end. The newer version you want will have 2BS on the end. 00 to 01 means a very minor change was made, sometimes it's just a different color.10éréRider said:So which one of those four is the one causing the trouble? I have a 2013 and my dealer wasn't sure if mine was one that should be replaced. I will be getting my valve clearance checked at the next service interval and was thinking that would be the time to change out the CCT. Is this when it's normally replaced?
10éréRider
Thanks for the picture and the info. The dealer did say that the part number for the 2013 was an "01" which told him it was the new revised one. I had my doubts about this so I'm glad I asked the experts here.OldRider said:Look at the end of the CCT. The one in the picture is off my 13 model and has 23P stamped on the end. The newer version you want will have 2BS on the end. 00 to 01 means a very minor change was made, sometimes it's just a different color.
The dealer can't even order the 23P part number, if he tried it would supersede to the 2BS number.10éréRider said:Thanks for the picture and the info. The dealer did say that the part number for the 2013 was an "01" which told him it was the new revised one. I had my doubts about this so I'm glad I asked the experts here.
10éréRider
Buy a Manual CCT no BS worrying about it failing unless you neglect to check it from time to time, and that's a no brainier it starts chattering tighten it..OldRider said:The dealer can't even order the 23P part number, if he tried it would supersede to the 2BS number.
Zepfan said:Found a broken shim when i pulled the tc clutch cover.
This doesn't look like a valve shim to me. Hard to tell from your picture, but this part appears to be cast iron or cast aluminum. How big is this piece?Checkswrecks said:My first question is whether you've found the rest of this?
As already stated, the pins are a decompression mechanism, I think to aid in starting. When you get the service manual, you're going to be kicking yourself for not having it earlier.Zepfan said:No all the shims were under the buckets
Showed it to dealer whos done all the valve adj and of course they didn’t know.
Parts for basic cct bolts gaskets near $600.
Can someone explain the small pins on exhaust cam?
The pins strike the valve caps.
Zepfan said:No all the shims were under the buckets
Showed it to dealer whos done all the valve adj and of course they didn’t know.
Parts for basic cct bolts gaskets near $600.
Can someone explain the small pins on exhaust cam?
The pins strike the valve caps.