Is the C3 material still on back order?TechSpec_TankGrips said:
Tech Spec Tank Grip/Protectors
- Thread starter Firefight911
- Start date
thecynic
New Member
:'(
:'( Always my luck, just submitted my order a couple of days ago. Oh well, based on what I am seeing, still think that I am going to be very happy with the tank grips!!
TechSpec_TankGrips said:
:'( Always my luck, just submitted my order a couple of days ago. Oh well, based on what I am seeing, still think that I am going to be very happy with the tank grips!!
Damn, mine are in route as I write this and I paid FULL BOAT!!!! That's worth a couple of pints of my favorite NW Micro brews.
sfc67 said:
::026:: Right, what's the word on C3????
Hey all! The c3 material is unfortunatly still on backorder, however, it should be arriving here at the shop by mid next week. As soon as it arrives we will be cranking em out in production so we can continue to help make your riding experience much more enjoyable. Thanks for the patience and support fellas! Cheers ::021::
Great I'll be ordering later the week.TechSpec_TankGrips said:
I would love to ride more but we still have lots of snow and another 15cm tomorrow so
still snowmobiling for another 3-4 weeks yet but at least it on a ::022::
SEAN
Sean, did you know you can enjoy out fine products year round?sfc67 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250953412895&ssPageName=STRK:MESE:IT#ht_479wt_1052
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250953412041&ssPageName=STRK:MESE:IT#ht_479wt_1052
::021::
Good news, thanks!TechSpec_TankGrips said:
Just to let all of our friends know, we are currently throwing ideas for a new tank material around here at the factory. Stay tuned for more info as it is delivered! Deffiniate answer to be released in/or before May 1st.
::021::
::021::
Rubberbaby
How I feel when not riding a Motorcycle...not good
2011 Site Supporter
2012 Site Supporter
Good day I just bought a set of Snake Skin of the new design.. YAY ::012::
Of course the code worked like a charm.. I decided to go with the new style. The funny thing is ..I have not bought the ST yet. Now thats MOXIE :-\
Stay tuned will let you know how long it took to arrive in Canada. Will be happy to share the expirence.. Nothing but good I'm sure... ;D
Of course the code worked like a charm.. I decided to go with the new style. The funny thing is ..I have not bought the ST yet. Now thats MOXIE :-\
Stay tuned will let you know how long it took to arrive in Canada. Will be happy to share the expirence.. Nothing but good I'm sure... ;D
`Rubberbaby said:
Glad to see you're pumped to set up the SS style on your soon to arrive ST. Happy Riding! ::021::
HEY ALL!
We've decided that for spring, we're going to GIVE AWAY two kits!!! Its madness here at the office but we feel its time to give back to our riding community. If you pop over to our facebook page (Gripster Tank Grips) and submit a photo of your bike, congratulations, you've entered the contest! Winners will be selected at the end of April. Good luck and Ride on friends!
::021::
We've decided that for spring, we're going to GIVE AWAY two kits!!! Its madness here at the office but we feel its time to give back to our riding community. If you pop over to our facebook page (Gripster Tank Grips) and submit a photo of your bike, congratulations, you've entered the contest! Winners will be selected at the end of April. Good luck and Ride on friends!
::021::
Anyone having issues with the 'new' Tech Spec kit not fully sticking to the tank? I have a spot, on both sides, where the tank tanks abit of a bend that will not stay stuck down. The edge is lifted by around 1/4" and about the size of a quarter.
Posted up on your face book.TechSpec_TankGrips said:
Yep, I made sure the tank was super clean and dry. I put them on in temperatures in the upper 70's and took my time and let them set for over a day before riding. I have one that started to peel up after about a month.stevepsd said:
I did the same thing, surface squeaky clean, temps almost 80, did not ride for 3 days after applying. It stayed stuck for about a month or so and then it started to peel up and it will not stay stuck down. Mine is the 'high-fusion' material.coastie said:
RIGS
New Member
Same problem here, I made sure the surface was clean and dry before I applied the kit. It started to peel up where the tank curved within a few days.stevepsd said:
I spoke with Techspec, sent pictures and they sent new side panels. I cleaned the suface and applied and within a few days, same thing.
I ended up trimming the side panels back, not exactly the look I was going for, but I decided it wasn't worth the time to finally get it right....
I have the High Fusion Kit 62-4003-HF.....
Somewhat dissappointed with the product.....
OK, so it's not just mine. Or mine are defective. It appears the the material cannot handle the angle of the bend and stay stuck.
I am thinking that I might just end up cutting out the material around the offending area. Better that then have dirt get wedged between the tank and pads and abrade away the paint.
Oh well.
I am thinking that I might just end up cutting out the material around the offending area. Better that then have dirt get wedged between the tank and pads and abrade away the paint.
Oh well.
swampyvt
Member
Should I even bother installing them? I have been waiting on a warm day to do it. I had them on my old bike and loved them, kinda disappointing that many are having issues.
Sent from my ADR6400L using Tapatalk 2
Sent from my ADR6400L using Tapatalk 2
Go ahead and install. They are great. Really. There is just a small spot at the front edge where the tank bends up that the material does not want to stay stuck. I'll take a pic of it. Not a big deal, but I will trim out this spot (the size of a quarter or so) and all should be good.swampyvt said: