~TABASCO~
RIDE ON ADV is what I do !
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Vendor
Hey folks,
I have four of our skid plates that are ninety five percent ready to ship. If you have ever been interested in one of our 'Vaults' and didn't want to wait for the machining or the time to build, here is your chance. If your not familiar with our skid plate here are a few key points.
~ The Vault ~
- do not have to remove to change the oil or filter, five min change
- entire plate is built using 1/4" (6.35mm) billet aluminum
- you can jack-up the bike with floor jack, etc.
- it is bolted to the frame only, does not touch the engine
- only protective part in the industry with a warranty
- protects much more than just the bottom of the engine
- the last and only plate you will ever need for the ST
- entire plate TIG welded inside and out
- comes with new bolts & hardware
- custom machining available
These four plates are in raw aluminum at the moment. Powder coating is available and our PC guy has over a hundred colors to choose from. If you have any questions feel free to let me know. I'm sure a few past customers will chime in on there experience with our product and customer service....
Thank you ~ Jaxon RIDE ON ADV
I have four of our skid plates that are ninety five percent ready to ship. If you have ever been interested in one of our 'Vaults' and didn't want to wait for the machining or the time to build, here is your chance. If your not familiar with our skid plate here are a few key points.
~ The Vault ~
- do not have to remove to change the oil or filter, five min change
- entire plate is built using 1/4" (6.35mm) billet aluminum
- you can jack-up the bike with floor jack, etc.
- it is bolted to the frame only, does not touch the engine
- only protective part in the industry with a warranty
- protects much more than just the bottom of the engine
- the last and only plate you will ever need for the ST
- entire plate TIG welded inside and out
- comes with new bolts & hardware
- custom machining available
These four plates are in raw aluminum at the moment. Powder coating is available and our PC guy has over a hundred colors to choose from. If you have any questions feel free to let me know. I'm sure a few past customers will chime in on there experience with our product and customer service....
Thank you ~ Jaxon RIDE ON ADV