Rear Master Cylinder/ SubFrame cover "cowl" on Gen 2 ST's

[SpudBob]

they are after market made nothing to do with world crosser, i have a 2013 world crosser they were never part of the world crosser kit
they were made by a third party i agree tried for years to get them but no luck

the pictures on kev #12 thread of those 2 panels mounted to the blue and black bikes none of those bikes are world crosser editions as well

rob

Gotcha. I assumed that since they were on the world crosser bikes that we saw here in the "Show" pictures, but never got stateside, that it was part of the package that Yamaha put together for that roll out. So who made them, Pyramid? I dealt with them years ago when they produced a hugger for the VTR1000 that I had. Beautiful piece of kit by the way.

 

[bimota]

Gotcha. I assumed that since they were on the world crosser bikes that we saw here in the "Show" pictures, but never got stateside, that it was part of the package that Yamaha put together for that roll out. So who made them, Pyramid? I dealt with them years ago when they produced a hugger for the VTR1000 that I had. Beautiful piece of kit by the way.

i don,t know who made them to be honest not PYRAMID for sure 7 years ago i tried to find them as i have a world crosser but other than pictures came up with nothing

rob

 

[Kevs]

Yes…it's a Unicorn. It is a limited edition called “Blue Factory”, or “Black Factory”.

Yamaha lance la série XTZ 1200 Super Ténéré Limited Edition

En 2010, Yamaha avait lancé la XTZ 1200 cm3 Super Ténéré. Pour 2012, la famille Ténéré s'agrandit avec la mise en concession d'une série baptisée XTZ1200 Limited Edition ''Blue Factory'' et ''Black Factory''. Ces séries limitées se différencient du modèle standard par la pose d'accessoires.

www.caradisiac.com

Yamaha XTZ 1200 Super Ténéré Limited Edition

Yamaha présente l'édition limitée du XTZ 1200 Super Ténéré dotée d'un silencieux akrapovic, d'un GPS Garmin Zumo 220, de flancs de carénages, de caches latéraux arrières et d'un kit sticker.

www.lerepairedesmotards.com

thanks mate.

at least some info on it.

sad they dont produce anymore

 

[Kevs]

as said a handfull were made 9 yrs ago but you can,t get them i tried for a few yrs back in the day and no can,t get them

rob

they are after market made nothing to do with world crosser, i have a 2013 world crosser they were never part of the world crosser kit
they were made by a third party i agree tried for years to get them but no luck

the pictures on kev #12 thread of those 2 panels mounted to the blue and black bikes none of those bikes are world crosser editions as well

rob

aw man.. shucks..

these are lit IMO.

 

[Mad_Matt]

Does anyone have a picture of what the eBay-style covers look like on the EXHAUST side of the bike?

 

[bimota]

 

[bimota]

 

[bimota]

those 2 above are the carbon one from pyramid but same as the ebay ones if it helps

rob

 

[Mad_Matt]

Is there a cover on the opposite (Exhaust) side?

 

[bimota]

Is there a cover on the bike's opposite (Exhaust) side?

that picture is the opposite side of ehaust

rob

 

[bimota]

the exhaust is the other side of this carbon panel

 

[bimota]

this is exhaust side that has the yamaha cover on it thats over the exhaust like all teneres have

 

[Mad_Matt]

I was trying to figure out what the second panel was for in the eBay ads. My assumption was it covered something on the exhaust side of the bike.

 

[bimota]

I was trying to figure out what the second panel was for in the eBay ads. My assumption was it covered something on the exhaust side of the bike.

View attachment 108112

don,t know to be honest, they normally come as one piece, it would not fit the other side anyway, all i can think of is its a support for the shapped piece and it goes underneath the shappened one as support

rob

 

[bimota]

i also think i,m right because, if you like me fit just the shaped curved one against the sub frame on the inside it would hold dirt mud etc in it ,
if you put that flat section under neath the curved one against the sub frame it holds off allthe dirt getting into the moulded area and holding it in there

rob

 

[Mad_Matt]

Ah, that makes way more sense!