eemsreno
Well-Known Member
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
does this actually flatten the angle of the seat ?
I tried it..................Yes it does.does this actually flatten the angle of the seat ?
I know I could just try ;-)
But does this work in both high and low pos.?
I was laughing at myself and the video because it took me a lot longer than a few seconds to get the seat to line up and latch properly. Once I did it, it was solid, no movement. As for help, sorry, just letting you know it took me a few times before I got it right.I don’t know if I am doing something wrong, I own a 2016 ES and I removed the 2 rubber bungs as instructed, put the seat latch in the lower position and locked the seat down, it looked to be flatter but I had about a 1/4 inch gap between the tank and the seat, I gave the seat a nudge forward and the seat moves forward to meet the tank and the tab at the back of the seat pops out of the low slot into the high slot, but now the 2 bungs are missing the seat rocks back and forward. Tried it about 5 times but always the same result!! Any ideas?
Gary
Gary it sounds like your seat under support is in the low position.I don’t know if I am doing something wrong, I own a 2016 ES and I removed the 2 rubber bungs as instructed, put the seat latch in the lower position and locked the seat down, it looked to be flatter but I had about a 1/4 inch gap between the tank and the seat, I gave the seat a nudge forward and the seat moves forward to meet the tank and the tab at the back of the seat pops out of the low slot into the high slot, but now the 2 bungs are missing the seat rocks back and forward. Tried it about 5 times but always the same result!! Any ideas?