Grasping at straws here, but there is a noise I can't pinpoint because it goes away or is not audible above 36ish mph or below 25.
The noise is not related to engine speed as it does it with the bike off, or clutch pulled in.
With the shock removed, and if the swingarm is moved through the arc of full travel, is there anyway for the driveshaft to get tweaked? There are no new noticeable vibrations, just a rapid noise best described as if something was lightly touching the spokes as the wheel goes round. (there is nothing loose on the wheel/lines/etc).
Problems that only arise at speed are pretty irritating ::010::
Only the shock and windscreen were changed since I rode it last, but everything looks just fine.
The noise is not related to engine speed as it does it with the bike off, or clutch pulled in.
With the shock removed, and if the swingarm is moved through the arc of full travel, is there anyway for the driveshaft to get tweaked? There are no new noticeable vibrations, just a rapid noise best described as if something was lightly touching the spokes as the wheel goes round. (there is nothing loose on the wheel/lines/etc).
Problems that only arise at speed are pretty irritating ::010::
Only the shock and windscreen were changed since I rode it last, but everything looks just fine.