RIVA
Well-Known Member
Hi Jiivee
Just pm my email address
Just pm my email address
DIY wind deflector for OEM handguards.
- Thread starter Jiivee
- Start date
mmm,
heres a question i have a normal home printer being told A3 not possible how are you guys printing this A3
ROB
heres a question i have a normal home printer being told A3 not possible how are you guys printing this A3
ROB
Superraid
Active Member
Local print shop mate or send it over I'll print and post, did something similar to these myself back along, but ended up with some 3d printed ones from deftoner, if they aren't equal you get a wobble over the ton though.
Saint rob
Well-Known Member
Thanks very much Jiive, I hope you don’t mind but I’ve attached the file below so you won’t need to send it to everyone who wants a copy. Please let me know if you want me to remove it and I’ll delete it straight away.
Now to source some material
Now to source some material
Saint rob
Well-Known Member
In work tomorrow
Jiivee
Well-Known Member
Thanks a lot!Thanks very much Jiive, I hope you don’t mind but I’ve attached the file below so you won’t need to send it to everyone who wants a copy. Please let me know if you want me to remove it and I’ll delete it straight away.
Now to source some material
There have already been several requests, so this is fine for me...
Last edited:
PineLaneRider
Well-Known Member
Rob,Thanks very much Jiive, I hope you don’t mind but I’ve attached the file below so you won’t need to send it to everyone who wants a copy. Please let me know if you want me to remove it and I’ll delete it straight away.
Now to source some material
here you are material 2mm or 3mm this is wwhat i,ve ordered
ABS Plastic Sheet ( A3 ) 297mm x 420 m x 2mm Textured Black. Hot Rod / Custom. | eBay
Bespoke cutting available. Best quality ABS 2mm. Black textured. Point of sale display. Vac forming, bending and moulding.
www.ebay.co.uk
ABS Plastic Sheet ( A3 ) 297mm x 420 m x 3mm Textured Black. Hot Rod / Custom. | eBay
Bespoke cutting available. Best quality ABS 3mm. Black textured. Point of sale display. Vac forming, bending and moulding.
www.ebay.co.uk
rob
also had it printed this morning, and can confirm as Jiivee says that if you buy a A3 2mm sheet of plastic like below you can get 2 pieces out of 1 A3 sheet of plastic
rob
ABS Plastic Sheet ( A3 ) 297mm x 420 m x 2mm Textured Black. Hot Rod / Custom. | eBay
Bespoke cutting available. Best quality ABS 2mm. Black textured. Point of sale display. Vac forming, bending and moulding.
www.ebay.co.uk
rob
Longdog Cymru
Well-Known Member
I am going to go to my local library Rob
Saint rob
Well-Known Member
Cheers Rob, did you go for 2mm or 3mm?Rob,
here you are material 2mm or 3mm this is wwhat i,ve ordered
ABS Plastic Sheet ( A3 ) 297mm x 420 m x 2mm Textured Black. Hot Rod / Custom. | eBay
Bespoke cutting available. Best quality ABS 2mm. Black textured. Point of sale display. Vac forming, bending and moulding.www.ebay.co.uk
ABS Plastic Sheet ( A3 ) 297mm x 420 m x 3mm Textured Black. Hot Rod / Custom. | eBay
Bespoke cutting available. Best quality ABS 3mm. Black textured. Point of sale display. Vac forming, bending and moulding.www.ebay.co.uk
rob
Jiivee
Well-Known Member
I measured the material I used and it is exactly 2.2mm thick. So I would try 2mm sheet because I think it is more flexible and easier to cut with scissors. And when the finished piece is installed, the curved shape and fastening stiffens it.
This is just my opinion and I can't say for sure how another material or thickness will work...
This is just my opinion and I can't say for sure how another material or thickness will work...
Last edited:
2mm, as a op in this thread made his own different to these in the pictures and he used 1/16th abs whitch is roughly 2mm and look good so i ordered 2mm
rob
KTM AL
Member
Hi Chaps
Before I cut my only bit of plastic, I offered the template up to the bike and it looks too long. I have 15 inches between the 2 furthest holes , could some one please check? . I had it printed to A3 at work .
Thank you
Before I cut my only bit of plastic, I offered the template up to the bike and it looks too long. I have 15 inches between the 2 furthest holes , could some one please check? . I had it printed to A3 at work .
Thank you
Jiivee
Well-Known Member
You are right, something is wrong and I don't understand what? I will try to figure it out on Monday with the company that made this pdf file for me. They printed the template for me and I assumed that the size is real when it is printed on an A3 sheet. I'm sorry if someone has already cut the plastic sheet.
Jiivee
Well-Known Member
This picture shows the actual size in millimeters...
KTM AL
Member
I'm glad I'd asked. I do have a fair few other projects to do on the S10 , but if you could please look in to what went wrong it would be great. Cheers
Attachments
Jiivee
Well-Known Member
I promise to find out what's wrong. I don't understand anything about files and programs myself, but the company that did this should be open tomorrow and I'm going to visit there. I'll let you know as soon as I know more...
shit i haven,t looked at mine i got the A3 sheet of 2mm plastic in the gouse ready, i,ve got the template printed on A3 but not looked any further
the template on the A3 sheet does look big mind
rob