dash shelf-cockpit infill SOLD

[Expflier]

I want one pm sent

 

[bethere62]

Is there a drawing of the filler panel that you would share?

 

[Hipshot]

This infill shelf is the best addition to my bike.

It should have left the factory this way.

 

[RockyDS]

My version ...

 

[TheHelios]

My version ...

On my implementation with that same panel, I moved the socket outlet to the left side of the panel and the USB outlets to the right. I did that because I wasn't able to fit any plugs into that socket (the dash buttons that protrude slightly lower than the rest of the dash gets in the way) which sort of made it useless. Are you using a specific socket there that's short enough to fit into that gap?

 

[JRE]

Bernie does a first rate job with these panels. Got mine the other day and wrapped it with some matte carbon fiber and and trimmed out the edge. Works well with the wind deflectors. The outer mounting plates give you a couple different options with the deflectors. Here's what I ended up doing...Turned out great...

What did you use for the trim piece and where from?

 

[RockyDS]

On my implementation with that same panel, I moved the socket outlet to the left side of the panel and the USB outlets to the right. I did that because I wasn't able to fit any plugs into that socket (the dash buttons that protrude slightly lower than the rest of the dash gets in the way) which sort of made it useless. Are you using a specific socket there that's short enough to fit into that gap?

I was concerned about that but the way I've done the panel it fits just fine. If you compare my picture with the one of your panel you posted earlier you'll see I mounted my USB/Volts/12v outlet panel a little further away from the dash buttons. Not a huge difference but enough to provide the necessary clearance.

 

[jimbob]

What did you use for the trim piece and where from?

Hey Joe, It's just 1/8" vacuum line split down the middle...

 

[JRE]

Ah...I actually have some of that laying around from my DRZ. Good idea!

 

[woods]

Just checking to see if there will be any more of the shelves produced?
Put Me in line

 

[BWC]

Just checking to see if there will be any more of the shelves produced?
Put Me in line

I will have some ready to ship in a week or so. You can send me a PM and I will get you on the list.

 

[woods]

Pm sent, thanks

 

[writerrider]

Another PM sent. Thank you.

 

[Rackcollector]

Received mine yesterday....nicely packaged....shipped right away and looks great. Can't ask for more than that.

 

[Will Rotten]

Just got my dash from BWC today. Now to see if my OCD ass can make up it's mind on where to put the holes... It looks great and fits like a glove. Thank you BWC. I feel it was extremely reasonably priced.

 

[stomp347]

Just got my dash from BWC today. Now to see if my OCD ass can make up it's mind on where to put the holes... It looks great and fits like a glove. Thank you BWC. I feel it was extremely reasonably priced.

Yup, received my today as well. Great deal, very well made. Thanks Bernie!

 

[Expflier]

Received mine today and very impressed with shelf and the packaging. This thing is aircraft quality nice to see pride in workmanship still exists. If anyone has been thinking about one you better do it before Bernie gets tired of making them! Thanks Bernie

 

[Will Rotten]

Install complete. Thank you for all the wonderful ideas. I used a little bit from several of you and a little of my own personal taste.

 

[BWC]

With riding season now here ::26:: these will be the last of the 12-13 dash shelf-infill panels for awhile. Will see if there is any interest between now and the fall, but these few are what are left from the last build. And if there is anyone who PMd me for one and I missed some how let me know. Bernie

 

[BThornton]

Will you be making anymore of the dash shelves? I am very interested in purchasing one. My bike is a 2013 the dash looks the same as the one in the picture in this thread so I don't think there is any difference.