Cruise not working after flash.

[outdoor]

So I crushed my headers and ther cruise would not work. I ordered arrow headers but they would take 8 weeks. So while I was waiting for the headers I had it flashed by speedway in Newmarket ontario. The flashed it in anticipation of my arrow headers and a kn air filter.

After the flash the cruise worked again. I installed the kn air filter still not arrow headers and then the cruise did not work. I thought that it was an air fuel thing and once I added arrow headers it would work again. Well no such luck now it is not working and no idea why. Could it be something with the flash that maybe was not correct?

 

[Sierra1]

. . . . now it is not working and no idea why. . . .

Have you had the brake switch recall done? If not, that's likely the culprit. The symptoms match. If you've had the recall done, I got nothing.

 

[thughes317]

Front brake light switch (as Sierra mentioned, there is a recall). If not, rear brake light switch, clutch switch, TB roll-off disengage switch.

 

[Paul466]

Have you had the brake switch recall done? If not, that's likely the culprit. The symptoms match. If you've had the recall done, I got nothing.

Is it for all years?

 

[WJBertrand]

Probably the brake switch, but check that the harness plugs are fully seated and clicked solidly in place on the ECU.

 

[Sierra1]

Is it for all years?

'14-'20. '21-'23s were fixed before they left the factory.

 

[outdoor]

Mine is 2020and I had the recall done

Still no cruise. Checked fuse, blown replaced still no cruise. New fuse intact

 

[Muybig]

Have you had the brake switch recall done? If not, that's likely the culprit. The symptoms match. If you've had the recall done, I got nothing.

Sierra the break switch recall covers what model year ?

 

[Sierra1]

Sierra the break switch recall covers what model year ?

'14-'20. '21-'23s were fixed before they left the factory.

 

[Jlq1969]

The cruise control does not turn on??…..or once on, it does not set??….check the rear brake switch….it is common for it to be “very tight” regulated…this will cause the stop light to come on and off intermittently just by the vibration”…and this will not allow the CC to be set

 

[Longdog Cymru]

'14-'20. '21-'23s were fixed before they left the factory.

Sorry, that’s not the case, mine is a 2017 bike and it was recalled.

 

[thughes317]

Sorry, that’s not the case, mine is a 2017 bike and it was recalled.

Huh? 2017 falls into the '14-'20 range as Sierra correctly stated.

 

[Cycledude]

Well I received a letter in the mail saying my 2018 was recalled years ago but it works fine so I never bothered to take it in, it now has 60,000 miles and cruise control is still working fine. Might wind up regretting not taking it in if cruise control quits working sometime when I’m on a long trip a long ways from home.

 

[outdoor]

The cruise control does not turn on??…..or once on, it does not set??….check the rear brake switch….it is common for it to be “very tight” regulated…this will cause the stop light to come on and off intermittently just by the vibration”…and this will not allow the CC to be set

It will turn on but not set

Checked rear break switch not tight light not coming on unless I press the brake pedal

I cleaned the front and rear abs sensors . They were not really dirty to begin with but thought o would try

 

[Sierra1]

. . . . Checked rear break switch not tight light not coming on unless I press the brake pedal . . . .

I still think the issue will be in the front brake switch.

 

[outdoor]

I still think the issue will be in the front brake switch.

I had the recall for front brake switch done though

 

[Sierra1]

I had the recall for front brake switch done though

Yeah, I know. But with most of all the past people with cruise issues, it came back to the front switch. Maybe a bad new switch? Did they actually do the recall?

 

[outdoor]

Not sure what im looking for but it appears to be a new switch and the little plungers are very easy to push in

 

[Jlq1969]

check the “clicks”…of the clutch lever and the front brake lever…two clicks each, the first click is the deactivation of the Cruise in both….the second click in the clutch is for starting in gear and the second in the brake lever it's the stop light

 

[outdoor]

check the “clicks”…of the clutch lever and the front brake lever…two clicks each, the first click is the deactivation of the Cruise in both….the second click in the clutch is for starting in gear and the second in the brake lever it's the stop light

Clicks? when, how do i check the clicks?