Anyone removed the rear brake lines for aftermarket ?

[~TABASCO~]

If so, do you still have your stock ones ? I'm looking for the shorter one that goes from the rear (foot) master cylinder up the ABS pump, and the longer one that leaves the ABS pump out to the rear brake. I would like to get a set made up for my bike, I need to know the length... Thanks

 

[avc8130]

I was able to easily take this measurement on my bike. Now if I could just remember where I wrote it down...

ac

 

[Dallara]

I was able to easily take this measurement on my bike. Now if I could just remember where I wrote it down...

ac

Is it one of those super-secret, "can't post it publicly on the forum, you'll have to call" kind of measurements, AC?

Dallara



~

 

[Ironhand]

Cripes, do you two swoop in and crap on all of his posts, or is it just my imagination?

 

[avc8130]

Cripes, do you two swoop in and crap on all of his posts, or is it just my imagination?

Like I said, I performed the measurement on the bike...but I have to find the piece of paper in my shop I wrote it down on. I never got around to having the lines actually made.

The main points of my post were twofold:
1. It is 100% possible to take the measurement with the lines installed on the bike.
2. I would look around the shop to see if I could find my scratch pad I had written my results down on.

ac

 

[Camshft]

Check out Greg the Pole's blog...he replaced all of his brake lines:

http://thetenerist.wordpress.com/2013/12/