Direct message him on this forum.
Any issues re-flashing newer S10's?
- Thread starter sthoward
- Start date
EternalGarage
Member
Thanks for that. I actually have *not* figured it out, and even tried to get some locals who *should've* had some idea...but didn't. And I don't know how I missed this guy, but he's pretty epic
.
EternalGarage
Member
Flashed my '22 and there is no measurable MPG difference. Well, no difference when I'm riding sanely. The extra roughly 10 bhp and the consistency of delivery and smoothness gained make it hard to stay out of! I'm getting high 40s overall, and I use this to commute and run errands. I still get mid-50s averages on long-stretch highway clips set at 82. Also, I'm not sure who would be fined, or how.
EternalGarage
Member
@TenereGUY, you might be the only person on the planet who can identify something I'm baffled about. I had the ECU flashed on my '22 ES - which turned out great! - but I had (and this really bugs the crap out of me) one bolt "left over." I took the assemblies apart and STILL can't find an empty threaded hole. It's a 12mm, black bolt, and there was only one like this in all the fasteners taken out. Maybe you recognize where it might have come from? Nothing is loose or even remotely insecurely attached from what I can see/feel. FYI, I've even stooped to taking this to a dealer :-|.
At 75 to 80 mine plummets too... but even lower with those wide panniers. Stripped of the panniers and not loaded I get 50 at 63 to 65 mph. Bags on it goes to 40. 75 drops to 30 to 32.
I'll look into it. Tabasco probably will know right off though.
Edited up date: is that a plastic or steel bolt?
Ok, I got out my manual (2015-2023) and looked for an exploded view. Page 4-18 shows the view of the electrical tray and removal. First photo is of the page. 2nd photo is of the bolts that it could be. I didn't circle the one coming in from the backside as that is not black... well, not on a 2017! If all is good then in a few months feel free to leave HOT Las Vegas and ride to Northern Illinois and we can figure it out as that will just give me an excuse to do some BBQ!
Last edited:
bigbruce
Member
Does anyone know who can flash a Canadian bikes EMU?
SuckSqueezeBangBlow
Well-Known Member
I had SpeedLabs do mine but they are in Richmond Hill Ontario so it was just a quick ride up the DVP for me. Do a search on Flash as I think there was someone in BC. I know Speed Labs used to do them if you mailed it in but you might want to check their website first.
bigbruce
Member
I should have been clearer. I need someone to flash my Canadian bike in the USA. Thanks
