fiddler
New Member
Hey guys, I have a problem I'm trying to fix. I changed my front tire a while back and didn't get the abs wire back in its cradle which allowed it to rub in the rotor and expose one of the wires. I pulled the wire apart and soldered the wire back together and reinstalled it. Well, I still have a abs light on and the check engine light stays on. I got into the diagnostic mode and check the :61 codes and there is none. I ordered a new wire but it's not in yet. Could this be something I have to have the dealer clear a code and reset something? I'm pretty good at diagnosing my dirt bikes but this Tenere with the ABS and UBS is a different animal. I checked my fuses on the right side as well and they're all good too.
Thanks,
Fiddler
Thanks,
Fiddler