2014 Side Stand Foot Vendors ?

[Harry Dresden PI]

After a bit of internet and searching the forum trying to find out which vendors make side stand big foots. (Florida ground is often wet and soft)

I found Altrider should fit the 2014 S10 ES but found no others (Cheaper?)

Any Comments or Suggestions?

LIST OF WHAT I FOUND

2014 S10 ES

Side Stand Foot

2013 Only Touratech

http://www.touratech-usa.com/Store/PN-046-0603/Large-Sidestand-Foot-Yamaha-XT1200Z-Super-Tenere-up-to-2013

Ride On ADV

http://rideonadv.com/shop/super-tenere-protection/altrider-side-stand-foot/

Alt Rider

http://www.altrider.com/altrider-side-stand-foot-for-2010-2013-yamaha-super-tenere-xt1200z-silver/pid/578

AMC

http://www.amazon.co.uk/Yamaha-XT1200Z-Super-Ténéré-Sidestand/dp/B00BS9TPLC

http://www.amcmoto.co.uk/side-stand-pads.html?dir=desc&mode=list&order=name

DSBP

https://www.advmotorrad.com/index.php?route=product/product&product_id=239

Hepco Becker

http://www.motorcycleadventure.com.au/shop/index.php?route=product/product&product_id=2555


Mastech

http://www.accessoryinternational.com/product/mastech-large-sidestand-foot-super-tenere-xt1200z.html

Wunderlich America

http://www.wunderlichsf.com/Merchant5/merchant.mvc?Screen=PROD&Store_Code=WS&Product_Code=8600504&Category_Code=SuperTenere-X

 

[~TABASCO~]

OK.... I think ours is the only cut from a chunk of solid aluminum... Most of the others will concave with the sand in your area, it will be rattling like crazy in no time... I've seen a million of them here at the office...

If your ultimate goal is cost, just go down have a chunk of aluminum welded to the bottom of your kick stand..

 

[Harry Dresden PI]

Ride On Web Site Lists one but does not seem to state if it fits the 2014 S10 ES? (Or I am tired and missed it)

I like the solid one piece design

http://rideonadv.com/shop/super-tenere-protection/rideonadv-sidestand-foot/

 

[klunsford]

Jaxon, by the way. I took a Dremel tool to the one for my 2012 and made it fit the 2014. Works very well. You won't go wrong with the one that Jaxon sells. Good looking and solid.

 

[Harry Dresden PI]

I send a message to Rideonadv web site asking to verify if they make one ... no reply yet but I found some related big foot info from Kappa (low cost Givi)

Kappa in a few web sites lists a 2014+ side stand foot.

http://www.speedmania.it/it/supporto-specifico-in-alluminio-e-acciaio-inox-per-allargare-la-superficie-di-appoggio-del-cavalletto-laterale-originale-es2119k

http://www.kappamoto.com/attachfile/content/moto_padre/112774/0.0.1.acc_man_es2119k.pdf

Any one have one or buy from Italy?

 

[snakebitten]

Jaxon at Rideonadv slow to respond?
Dude doesn't have a life. Lol
Hard to get faster response than Jaxon.

Oh wait, did you say email?
Yea, he ain't much of a geek.
He's a dinosaur, in fact. He answers phone calls. (and texts if you get his cell number)
I suppose Sunday night might be a stretch. But just about ANY other time he'll put down his TIG, and answer.

 

[MIKE R]

Givi are also making a side stand extender for the 2014 model.....part number ES2119.

As far as I am aware this is the only 2014+ side stand extender available in the UK at the moment

Mike

 

[~TABASCO~]

I send a message to Rideonadv web site asking to verify if they make one ... no reply yet but I found some related big foot info from Kappa (low cost Givi)

Kappa in a few web sites lists a 2014+ side stand foot.

http://www.speedmania.it/it/supporto-specifico-in-alluminio-e-acciaio-inox-per-allargare-la-superficie-di-appoggio-del-cavalletto-laterale-originale-es2119k

http://www.kappamoto.com/attachfile/content/moto_padre/112774/0.0.1.acc_man_es2119k.pdf

Any one have one or buy from Italy?

We have our aluminum one in stock. It will require about 1/16" filed off the 14-15' aluminum kick stand.. I'm very surprised my million dollar web sites not working properly.. I'm going to have to fire our 'no where to be found' web master..
Thanks for letting me know, I didn't receive your question, if you ever have a question and you cant seem to reach me please CALL.... I'm running around working all the time.. I don't have a crew of 10 over here...

Thanks again ! ::008::

 

[~TABASCO~]

Jaxon at Rideonadv slow to respond?
Dude doesn't have a life. Lol
Hard to get faster response than Jaxon.

Oh wait, did you say email?
Yea, he ain't much of a geek.
He's a dinosaur, in fact. He answers phone calls. (and texts if you get his cell number)
I suppose Sunday night might be a stretch. But just about ANY other time he'll put down his TIG, and answer.

I need a McDonalds head set to go under my welding helmet... Always building cool parts over here !! ::012::

 

[copb8]

I have Jaxon's rideonadv billet foot and it's super clean looking and effective. I didn't care for the altrider one which seemed overly complicated just to do a simple job.

 

[AVGeek]

I need a McDonalds head set to go under my welding helmet... Always building cool parts over here !! ::012::

Maybe you should mount a Sena to your welding helmet? ::015::

 

[tomatocity]

Harry, what sidestand enlarger did you purchase? I am looking for one that is thin and does not raise the Tenere much.

 

[Harry Dresden PI]

I got the

http://rideonadv.com/shop/super-tenere-protection/altrider-side-stand-foot/

I wrote an install with a few photos somewhere on the site.

Does raise it a few mm s .... not a lot but watch it

 

[tomatocity]

Just ordered the Altrider Side Stand Foot from Revzilla.

 

[Balmorerider]

I got the Altrider foot enlarger for my 2015 S10 and like it a lot. I especially like that it has raised the bike just enough higher up so that when I bike on a surface that slants downward to the left it makes it a good bit easier to get the bike off the side stand.

Chris