Search results

Hi there. So ive done valve clearances and TBS recently. Am looking at options for an ECU flash now. Mainly to improve the trottle response as i find it quite jerky when the power first comes on. I dont really want a power commander module etc as i have no interest in adjusting it myself and i...

Anyone tell me what i have done wrong here? I cant remember how this bracket and hoses are suppose to go. 2010 S10. Anyone with a pic of how its suppose to look would be great. Mine is now rubbing on the spotlights. Cheers. Dave. Sent from my LG-H930 using Tapatalk

Anyone know if this kit would work for my 2010 gen1 S10? Cant find one specific to 2010 model. I would have thought the MC is the same. Any other better kits i should look at? Cheers. Dave. Sent from my LG-H930 using Tapatalk

So my valve clearance adjustment continues on. Wanted to show how i reset the CCT as it was a PITA till i worked it out. Might help someone else if they struggling. Ended up placing body in a vice and then used a socket on an extenstion with the finger from a rubber glove for grip. Key was to...

Hi there, With my bike now off the road for over 2 months now because of the unbleedable front brakes, have made some improvement but still soft on the first few lever pumps then hardens up, i decided to check the valve clearances and TB sync as i dont know if it was ever done before. 2010...

Hi all, 2010 S10 Anybody know if its possible to pressure test front calliper to see if it has a leak or air trapped somewhere in it?? How would I go about it?? I have a firm brake line up until with only minimal lever movement up until the adding the callipers into the system. I clamp above...

Live here on the sunny coast of QLD. Own a 2010 super tenere with 60000km on it.

Hi there all, I have just installed a new rotor on front and put new seals in the calipers. After reinstalling components i have been unable to get proper pressure in front brake lever even after bleeding and cycling the abs many times. I have some pressure but need to pull lever right back...