What Tank Pads Are You Using?

[Pegrider]

I have been researching tank pads for my 2013 S10 and am not coming up with a lot of reliable options. Snake skins have some that fit the Tenere but the reviews are mixed, particularly in reference to the adhesive not effectively doing its job after some use. The other issue is that I haven’t found other companies that make pads for the S10. I’m curious as to what you guys are using (if any). I have been in situations off-road that I believe grip pads would have been useful.


Sent from my iPhone using Tapatalk

 

[MFP]

I have been researching tank pads for my 2013 S10 and am not coming up with a lot of reliable options. Snake skins have some that fit the Tenere but the reviews are mixed, particularly in reference to the adhesive not effectively doing its job after some use. The other issue is that I haven’t found other companies that make pads for the S10. I’m curious as to what you guys are using (if any). I have been in situations off-road that I believe grip pads would have been useful.


Sent from my iPhone using Tapatalk

YAMAHA Super Tenere Design #2 Snake Skin Tank Grips: Free Center Tank Protector 60 Included

Precut kit includes left and right tank grips and center tank protector.

techspec-usa.com

I have these ^^ installed on my '13 for the past 4 years and they work great. The textured "nubs" on the side grips where my knees and inner
thighs rest occasionally are a tad bit worn and when I wear light colored pants regardless of what fabric they are made of they sometimes get dirty from
rubbing on the pads but never permanently stained. The side grips function great. I am 6'2" so I am constantly moving around on the seat especially on longer slab rides as well
as when I venture lightly off the pavement.
The center tank protector pad keeps my tank nice and unblemished from zippers, belt buckles, etc.. If you follow the installation process correctly these grips/pads are not going anywhere. Highly recommended!
**There are also these larger side versions available as well:

YAMAHA SUPER TENERE (2010 - CURRENT) Snake Skin Tank Grips: Free Center Tank Protector 60 Included

Precut kit includes left and right tank grips and center tank protector.

techspec-usa.com

 

[Sierra1]

I've used AliExpress. Here are the tank pads. They also have some decent Yamaha T-12 graphics. They don't move real fast as far as getting the product(s) to you though. Couple of other members here use them also.
$10.65usd $11.09usd $5.94usd

 

[SkunkWorks]

TechSpec user as well.
They stick really well. No issues with the adhesive coming off.
They are grippy for my inner knees when I need them, and protect the Tank really nicely.

 

[Sierra1]

Old pic? No magic gold rims.

 

[Wallkeeper]

I also use Snake Skins. They adhere fine IF you follow the instructions and make sure the tank is absolutely dirt, wax and silicone free

My SIL had a problem with them when he did not make sure everything was clean

 

[bimota]

tech spec on the sides and yamaha dakar one in the middle

 

[Sierra1]

Another old pic? Those aren't Altrider bars.

 

[bimota]

Another old pic? Those aren't Altrider bars.

correct on both accounts sir,

they were SW MOTECH only picture i have with out taking another today of the tech spech

rob

 

[Sierra1]

You haven't taken any new ones since the new bars?

 

[bimota]

just been out this minute fella to get a new one for tank pads lol

 

[Jdubco]

using just a cheap one from ebay, its about prep (wax/grease remover, not just alcohol or carb cleaner etc) and then when putting it on and after putting it on and making sure you rolled/or pushed it on nice and tight dont use it for about a day this lets the bond fully setup. also using a cheap ebay one on my dr650 which has a plastic tank which are notorius for not sticking with no problem

2x Side Tank Traction Grips Pads Fit for Yamaha XT1200Z Super Tenere 12-2019 | eBay

it has stayed put through lots of offroad including the cobdr, in the heat and the cold. no reason to spend big money on some name brand.

 

[MIKE R]

I have Tech Spec on mine as well. Never had a problem with adhesion

The first set were transferred over 3 (long story) S10s ( I believe they are advertised as being able to be removed and re-applied elsewhere) but the glue finally gave out and I had to replace then for my 4th Super 10 as I didn't want to mess about using an unknown glue

Old Bike



Latest S10



Mike

 

[StefanOnHisS10]

OEM for me. And the Touareg in the middle.

 

[Pegrider]

Thanks for the input and the advice on installation. Now I’ve got info and links to make my selection. You guys have some really great looking rides. I really appreciated the pics.


Sent from my iPhone using Tapatalk

 

[Sierra1]

. . . . And the Touareg in the middle. . . .

A.K.A. wrinkled penis with eyes.

 

[holligl]

I have Tech Spec on mine as well. Never had a problem with adhesion

+1

Sent from my SM-N950U using Tapatalk

 

[Electrolyse]

Have to install those some days

 

[Scrambler007]

SnakeSkins but wasn't happy with their designs, so I ordered the sheets and cut my own design.