Throttle cable wire guide...

[mbabc]

With my 2" risers the throttle cables are tight at full lock. Anyone remove the rectangular wire guide that the cables run through?

Guess I can just cut it off.....

Anybody remove theirs?

 

[imrubicon]

Im not tryingh to be ::010::
But if just tight at full lock ,
how often do you ride at full lock.
I used risers on my last bike and was the same but I let it go for 4 years as I didnt ever put it at full lock. just asking

 

[52edub]

I am using 2" Rox Risers and only had issues with the throttle cables hitting the brake reservoir at full lock. I ended up flipping the throttle upside down.

 

[jajpko]

With my 2" risers the throttle cables are tight at full lock. Anyone remove the rectangular wire guide that the cables run through?

Guess I can just cut it off.....

Anybody remove theirs?

Yep, I removed mine. You will need to use a large wire tie and keep the cables from catching on the front of the steering head. When you look at it you will see what I mean. Works great.. I also ran the wire loom on the right side different.

 

[mingo]

I am using 2" Rox Risers and only had issues with the throttle cables hitting the brake reservoir at full lock. I ended up flipping the throttle upside down.

Looks good! Did you also drill a hole for the locating pin when you flipped it upside down?