Nortenere
New Member
My Super Tenere i a 2012 with km 62.000. When I did a hill start a few weeks ago the rear brake had no resistance. Since then I have bleeded the rear brake and cycled the ABS pump. I get pressure when I pump the brake pedal and hold it. When I Iet the pedal up and press it down again, there are no pressure. I could feel the ABS working front and rear when I cycled the ABS pump. I hope the seals in the master cylinder i leaking. My plan is to change the seals first. If still no rear brake I have to contact the dealer. I have read a lot about rear brake failures in this forum and it is often a symptom of ABS pump failure. Has anybody replaced the seals in master cylinder and solved the problem?
Thanks Nortenere
Thanks Nortenere