ngilbo
Member
Any advise on how to slacken off the power outlet on the dash?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
What did you have to remove to get to the “nut”?I made my own out of a plastic chopping board.
Mines really tight - will try some pliers tomorrowJust reach down there as they are usually not too tight. If yours is, a pair of pliers or small Channel Locks ought to work.
This. I used a flat blade to catch one of the sprocket teeth on the nut and tapped it to get it started. Removing the side cover is not necessary.As I recall I used the tip of a blade screwdriver to loosen the nut. It, the nut, has raised indents on it that the screwdriver tip can push against. Easier than trying to negotiate a pair of pliers in that tight area.
can you get to the 12v aux socket,s 2 pin plug to pull out without taken the side panel offThis. I used a flat blade to catch one of the sprocket teeth on the nut and tapped it to get it started. Removing the side cover is not necessary.