poor running

scruffymick

New Member
Joined
Aug 30, 2021
Messages
1
having trouble with 2010 xt 1200 .out yesterday on bike , after 200 miles had to stop for road works when continued with journey bike wouldnt rev past 3000 rpm and had now power. after drining for a little while like this it started to pick up a bit and power was back to normal but it was very noisy and was miss firing, felt like it was a petrol problem but am not sure as only have bike 2 months. checked fault code on clock and it comes up as 14 . any help directing me in right direction would be helpful. bike was serviced when i got it. im in ireland its uk moder bike.
 

StefanOnHisS10

Converting fuel into heat, noise and a bit motion
Staff member
Global Moderator
Joined
Apr 8, 2020
Messages
2,181
Location
The Netherlands, Friesland.
having trouble with 2010 xt 1200 .out yesterday on bike , after 200 miles had to stop for road works when continued with journey bike wouldnt rev past 3000 rpm and had now power. after drining for a little while like this it started to pick up a bit and power was back to normal but it was very noisy and was miss firing, felt like it was a petrol problem but am not sure as only have bike 2 months. checked fault code on clock and it comes up as 14 . any help directing me in right direction would be helpful. bike was serviced when i got it. im in ireland its uk moder bike.
Welcome in town scruffy. We are more than willing to help with any problem you might have. But please be a gentleman and do a proper introduction of yourself in the “new members” section. While you are doing that please update you’re profile with a location and so forth.

Thanks for cooperating.
 

Don in Lodi

Well-Known Member
Founding Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Feb 1, 2011
Messages
5,780
Location
Lodi Kalifornia
Eleven years old, the vacuum lines and caps probably have never been replaced.
 
Top