PIAA LP 530 Light wiring help

[ragrep]

Hi All,

Just purchased a set of PIAA LP 530 LED lights and the Mount kit for the S-10. Found a really good deal not the light kit for $180. Must be the kit for a car as the harness includes a dash mount switch. Don't think this will be weather proof for the bike. Any advise on a wiring harness for this application? Not much info on the PIAA site.

Thanks
-ss

 

[trasbeck]

Someone on here sent me the following...works great if you want them to come on with high beams...tapped into the yellow wire to trigger the relay (if I remember)....hope I did the link here correctly...

http://www.yamahasupertenere.com/index.php?topic=7329.msg124186#msg124186

 

[VPS1]

Ended up with the same car kit not the Powersports kit. I called PIAA and the parts guy was extra helpful and found an open box harness he could send me for around $25 shipped. Might be worth a try.

 

[ragrep]

Thanks Trasbeck and VPS1, I will try to contact PIAA and see if they can help me out with the powersports harness. looking to power them by themselves and not with the high beams. Trasbeck, do you like the lights and did you mount under the headlights? I'm sure the car kit is doable juts not that good with wiring and that switch probably will not hold up getting weather on it. Thanks again!
-ss

 

[trasbeck]

I like the lights but have none others to compare them to. They are mounted on AltRider crashbars using PIAA brackets. I have had many comments on how noticable they make me in daylight, which is why I got them.

 

[hojo in sc]

I use these and love 'em;


http://www.easternbeaver.com/Main/Elec__Products/Switches/switches.html

 

[Guls]

Installed the lights but they are not connected yet. I ordered the switch and OEM connector so that I can connect to the existing circuit.