LloydW
New Member
The Rumbux Crash Bars will not allow the PIAA ST adapter for the PIAA lights to fit normally. I had to fabricate an extension bracket. See photos.
I first created a template and then used ⅛ inch plate steel and a grinder to shape the bracket. I then drilled the holes and spray painted it with two coats of black paint. I added an insulator to route the wires through to the PDM60. I replaced the button switch with a waterproof toggle which I add to the new dash. I will do another post later showing the dash.
I have not yet added the split braided wiring cover to the wires.
Hope this helps someone.
Tried to post this earlier but the photos were too large.
UPDATED 2017-0908: Template photo attached. Make use you size the photo so that the upper two holes are 120mm apart. The punch holes are dead centre of each hole. I used green painters tape to attach template to steel plate for drawing and punching holes. I added the ¾ inch insulator hole later.
If someone knows how I can turn the template into an actual size PDF file, please explain and I will add a PDF of the template.
I first created a template and then used ⅛ inch plate steel and a grinder to shape the bracket. I then drilled the holes and spray painted it with two coats of black paint. I added an insulator to route the wires through to the PDM60. I replaced the button switch with a waterproof toggle which I add to the new dash. I will do another post later showing the dash.
I have not yet added the split braided wiring cover to the wires.
Hope this helps someone.
Tried to post this earlier but the photos were too large.
UPDATED 2017-0908: Template photo attached. Make use you size the photo so that the upper two holes are 120mm apart. The punch holes are dead centre of each hole. I used green painters tape to attach template to steel plate for drawing and punching holes. I added the ¾ inch insulator hole later.
If someone knows how I can turn the template into an actual size PDF file, please explain and I will add a PDF of the template.
Attachments
-
35.3 KB Views: 28
-
30.6 KB Views: 28
-
33.3 KB Views: 29
-
23.1 KB Views: 30
-
25.5 KB Views: 42
-
31.1 KB Views: 40
-
43.5 KB Views: 48
-
82.8 KB Views: 25