How long have you had yours? I was told by Parabellum that this was taken care of. If I get it and they are still hitting the hang guards I might be disappointed.bruised said:Guess I meant to say it hits the handguards a little at full turn
Sent from my XT1080 using Tapatalk
What did adding the Wasp adjuster give you? I saw them online but am not sure what it would do for me.hANNAbONE said:I'm loving my Parabellum.
I have the 24"
It's coupled with the Wasp adjuster - heaven....
I agree that the extra tall in the upper position does move around a good bit. I had the same thought about the mounts breaking. This weekend I may try to move it into the lower position but am afraid that this will bring back some of the buffeting that was fixed in the high position. I still get a decent amount of wind in the high position.Reveille said:I had the Givi 447 and it was OK with some spacers to tilt it out a bit. I'm 6'4" so I ordered a Parabellum extra tall a month ago. I have put 1500 miles on it since and it's nice but a smidge too tall in the upper holes. I was going to send it back and have them trim an inch but may try the lower holes and if I like that I'll trim arounf the turn signals like mentioned above. Just a little warning, the extra tall flops around quite a bit and I worry about breaking the bike mounts. I did a bunch of off road this past weekend and it has held up so far. Hoping the lower mounting holes does the trick ::024::
IMO the Parabellum paired with a Madstad or any adjustable mount would be a bad combo. The extra tall will give you plenty of coverage mounted direct to the bike. You will have too much floppiness with a Madstad. I love my extra tall especially since I installed the seat concepts which raised the seat a half an inch or so. Perfect match for me. At first I thought it would be too tall but it's actually just right. It's been on there for 9 thousand miles now including some very aggressive off road riding and so far so good ::008::lacofdfireman said:Any updates on the Extra Tall Parabellum? I am considering getting one of these. At 6'5 there is some pretty good buffeting going on that I would like to get figured out. Also are people using these on the MadStad or the Wasp windshield adjuster? Which one of these would you recommend. Also if anyone can post up some pics of the Extra Tall Parabellum that would be appreciated...
You can mount it in the lower position but the lower, outside corners will rub on the turn signals. I'm 5' 10" and found the tall screen in the top position was too tall. I was looking through it too much. So I cut rounded sections out of the corners and mounted it in the lower position. Now it's perfect. See the photo earlier in this thread. I'm very happy with this screen. It's creates a quiet, undisturbed pocket of air for me (along with the Yamaha side wind deflectors) and the flow of wind goes right over the top of my helmet. I can ride with my visor open at any speed.Tengai said:I ordered the 24" tall yesterday and was told they are made to mount in the high position.