MIKE R
Well-Known Member
I need to replace both my tyre valves.
Can anyone out there tell me the sizes
Many thanks
Mike
Can anyone out there tell me the sizes
Many thanks
Mike
OEM Tyre Valves
- Thread starter MIKE R
- Start date
MIKE R
Well-Known Member
After a bit of Googling I think the OEM valves are:-
TR412 (in the UK) which is a standard motorcycle valve.
I hope this helps someone.
Mike
TR412 (in the UK) which is a standard motorcycle valve.
I hope this helps someone.
Mike
They are .453".
SilverBullet
Well-Known Member
TR412 is correct.
I bought these a few months ago, good quality, cheap and fast shipping. I now have a lifetime supply. They accepted my best offer of $8.00
https://www.ebay.com/itm/25-PCS-TR412-TIRE-RUBBER-VALVE-STEM-ATV-LAWN-MOWER-GARDEN-TRACTOR-PLUG-STEM/152747293017?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
I bought these a few months ago, good quality, cheap and fast shipping. I now have a lifetime supply. They accepted my best offer of $8.00
https://www.ebay.com/itm/25-PCS-TR412-TIRE-RUBBER-VALVE-STEM-ATV-LAWN-MOWER-GARDEN-TRACTOR-PLUG-STEM/152747293017?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
MIKE R
Well-Known Member
Going for new tyres tomorrow (probably Bridgestone A41) and the tyre fitter has plenty in stock so he'll change them at the same time.
Thanks for our help
Mike
Thanks for our help
Mike
Cycledude
Well-Known Member
https://www.ebay.com/itm/45-DEGREE-ANGLE-METAL-CHROME-TIRE-VALVE-STEMS-HIGH-PRESSURE-BOLT-IN-4-PIECES-503/141545376006?hash=item20f4c30906:g:btoAAOSwzrxUu1EJ&vxp=mtr
Put these 45 degree stems in the Tenere back in 2016 , trouble free and very easy to check air pressure.
On my Goldwing I use metal 90 degree stems and they have been trouble free for about 400,000 miles
Put these 45 degree stems in the Tenere back in 2016 , trouble free and very easy to check air pressure.
On my Goldwing I use metal 90 degree stems and they have been trouble free for about 400,000 miles