OEM Side Case mounting kit install ?

maverick2076

Active Member
Joined
Jul 7, 2018
Messages
119
Location
Texas
Can anyone point me to some installation instructions for the OEM side cases? I bought a set off a poster here and need to find some install instructions.
 

INDY TEN

New Member
Joined
Nov 11, 2016
Messages
5
Location
info
Know this is an old meesage but really saved my bacon ! Just bought used set and this is going to make it so much easier ! Thank you !
 

KLMiller46

New Member
Joined
Feb 2, 2020
Messages
3
I bought a used set but missing the part # 17 and 18 spacers. Anyone have a size/ spec on those so i can source generic locally? Thanks!
 

Jlq1969

Well-Known Member
Joined
May 5, 2018
Messages
461
Location
Argentina
I bought a used set but missing the part # 17 and 18 spacers. Anyone have a size/ spec on those so i can source generic locally? Thanks!
Disassembly can be measured, armed is difficult because it enters inside the handles and you cannot see how much it enters. if you zoom the pic on monitor computer until the size of the screws conicide with the screws you have, next to these are spacers they should give you the measure, you can do it from some black polymer
47220235-86EF-4A72-BDB2-1AAAC23A1323.jpeg
 
Last edited:

KLMiller46

New Member
Joined
Feb 2, 2020
Messages
3
Disassembly can be measured, armed is difficult because it enters inside the handles and you cannot see how much it enters. if you zoom the pic on monitor computer until the size of the screws conicide with the screws you have, next to these are spacers they should give you the measure, you can do it from some black polymer
View attachment 63128
That's a pretty good idea. Never would of thought of that on my own.
 

KLMiller46

New Member
Joined
Feb 2, 2020
Messages
3
I have the spacer's dimensions but it is at the office. I'll get it tomorrow.
Awesome, if my logic is sound, the front is a 5/8" spacer and the rear is 1" spacer. I added the thread depth of the factory bolts to the stack of bushings and brackets, and then subtracted from the longer bolt lengths. Curious to see how far off I am.
 

Jlq1969

Well-Known Member
Joined
May 5, 2018
Messages
461
Location
Argentina
Awesome, if my logic is sound, the front is a 5/8" spacer and the rear is 1" spacer. I added the thread depth of the factory bolts to the stack of bushings and brackets, and then subtracted from the longer bolt lengths. Curious to see how far off I am.
An error of 9,92% in the long and 1% in the short, being the first time, not bad:):)
 
Last edited:

AusTexS10

Member
Joined
Jan 24, 2020
Messages
66
Location
Austin, TX
I just got a brand new set of the hangers with detailed step-by-step instructions and parts list. I'll grab it at home tonight and try to copy and post it tomorrow. I can also copy the more detailed instructions for working with the panniers.
 

Piachu

New Member
Joined
Jun 22, 2020
Messages
2
Can anyone point me to some installation instructions for the OEM side cases? I bought a set off a poster here and need to find some install instructions.
Same question but regarding ZE version. As you know the right handle is occupied with compressor. Any guide for ZE available?
 

WJBertrand

Ventura Highway
Joined
Jun 20, 2015
Messages
2,674
Location
Ventura, CA
Same question but regarding ZE version. As you know the right handle is occupied with compressor. Any guide for ZE available?
There's no difference in the mounts between the standard and ES models, at least through the '15 model that I have.
 

lemmifun

Member
Joined
Sep 5, 2019
Messages
13
Location
Montville,NJ
Same question but regarding ZE version. As you know the right handle is occupied with compressor. Any guide for ZE available?
I used this instruction for my 2019 ES. Good luck
 

Attachments

Top