Hello fellow riders, I have a question about the manual CCT procedure, let me give you a little background:
2013 S10 with 23k miles, did not want to start after 15 days sitting, pulled and cleaned everything ( fuel starvation might have been the issue, changed the inline fuel filters and it fired up ).......so since valve check was due.....went ahead with it, and I'm happy to report, all is well within spec, dodged a bullet there
So since I was there, decides to change to a manual CCT, and with the S10 in TDC, changed it, went finger tight and buttoned it all up, started the bike, started right up, no funny noises no nothing, with the clutch pulled so i could finely hear the cam chain, backed up a little, started to hear some chain slap, barely....so started to tighten it....finguer, the with a 7mm spanner.....specting to hear the buzz sound of to tight BUT, no buzz sound, nasty sound, chains slap sound, metal to metal sound........so I backed it out a bit......no noise, just cam chain noise ( as if it was a bit loose ), noisy bitch.....
did I do something wrong? why does it get noisier when I tighten it? I've never had a manual CCT but did not expect this....
2013 S10 with 23k miles, did not want to start after 15 days sitting, pulled and cleaned everything ( fuel starvation might have been the issue, changed the inline fuel filters and it fired up ).......so since valve check was due.....went ahead with it, and I'm happy to report, all is well within spec, dodged a bullet there
So since I was there, decides to change to a manual CCT, and with the S10 in TDC, changed it, went finger tight and buttoned it all up, started the bike, started right up, no funny noises no nothing, with the clutch pulled so i could finely hear the cam chain, backed up a little, started to hear some chain slap, barely....so started to tighten it....finguer, the with a 7mm spanner.....specting to hear the buzz sound of to tight BUT, no buzz sound, nasty sound, chains slap sound, metal to metal sound........so I backed it out a bit......no noise, just cam chain noise ( as if it was a bit loose ), noisy bitch.....
did I do something wrong? why does it get noisier when I tighten it? I've never had a manual CCT but did not expect this....