Need info PIAA Light Bracket (#74300)

[Arkyrider]

I have Black Oak LED 2" Fog Lights that I would like to install under the headlight instead of on the crash bars. I want to use the Tenere PIAA bracket (#74300) but because the Black Oak light is a little longer than the PIAA LP530 light I don't know if it will work. Can someone tell me if there is at least a 1/4" from the back of the PIAA light (LP530) housing to the bracket? Also, does the bracket have any flex to it, the Black Oak light is narrower. The bracket on the Black Oak is removable and the screw that holds it is 2" from the front same as PIAA light.

 

[WJBertrand]

I think those should fit with the PIAA brackets, size wise as long as they have side mounting bolts? I mounted a pair of Great Whites Bull Bar lights (https://greatwhites.com.au/product/bull-bar-light-pair/) using the PIAA brackets and they are 4.3" deep and 3.75" in diameter. I guess it's probably more important to understand the depth from the mounting bolts as opposed to the overall dept though? I had to enlarge the holes for the lamp bolts slightly but otherwise they worked well with the PIAA mounts.

 

[Arkyrider]

Good thought. i didn't check the distance from the mounting bolt to the back of the housing. Looks like basically 1" on the PIAA from bolt to back of housing whereas the Black Oak is 1 1/4" (I measured it on the actual light). The Great Whites seem to be a bit bigger @ H - 95mm, L - 95mm, D - 110mm compared to H - 74.9mm, L - 81.2mm, D - 82.5mm. I think it will work since the larger lights you installed fit.
Thanks for info.

 

[OldRider]

Looks like 2 inches

 

[Arkyrider]

Looks like 2 inches

Looks good to me, picture convinced me it should be ok. ordering brackets. Thanks.