Hi all! I have a 2013 Tenere and I’ve recently started working on it, very new to working on vehicles. And I lost brake pressure in my rear brake yesterday. After putting in new fluid and bleeding the brakes, it started working as normal but it’s still leaking. I found where the leak is coming from but not sure where to go from here, any advice? Thanks guys!
RCinNC
Well-Known Member
It could be something as simple as the banjo fitting has become loose. I'm not looking at my bike right now, but I think there's either a socket head or a Torx bolt on top of that fitting, that you can snug down and see if that stops the leak. If not, you'll probably have to remove the banjo fitting and replace the crush washers that you see at the top and bottom of the fitting.