::..I have GIVI bags on my current K12R.sport and-----..::

[hANNAbONE]

And...might wanna plug this 3-bag set of E52 & 2-E41's on my Supa10.
I get a hold of GIVI via website and email and they get back with me by days end on what I should order.
I explain to them via the email on the cases I currently own and want to affix to the new Supa10.

I explain that the bags I have and want to fit are the E52 top case and the 2 - E41's

They say the racks for the side cases are PLR-367 -- and -- the top case mounting is SR-371

When I kinda look around the web to get a better picture of the top case plate it kinda shows what I already have.
Which is the mounting (*mating*) piece that locks the top case in place.
It does not show a steel plate that installs to the OEM rear rack, at least not in my mind did it show that.

I already have the locking mechanism rack for the bottom of the top case. It's fixed on my K12R.sport scooter.

Isn't this same locking part the same part I'll need to lock it on the Supa10? Don't I need a specific plate for the rear rack of the S10?

My questions then...

It the top case plate something that bolts directly to (*or in place of*) the OEM rear rack?

If you google "GIVI SR 371 image" you'll actually get a posting from ADVrider that has a picture from a gent from England that had purchased that part number.

It look nothing like I have currently, nor does it look like it would accept and mate the bottom of my current E52.

H E L P .........~~!~!!~!!~~!!!

 

[colorider]

Here's a picture of the install instructions that come wtih the SR371. There is a small bag of mounting hardware, two mounting brackets and the adapter plate itself. The whole setup replaces the existing rear rack.

 

[justbob]

Here is something to consider, I think the rear cross brace for the Givi hardware to support the side bags crosses inside the rear fender and does not attach to the bike, only to each of the 2 side mounting brackets.
Just last week a friend with a similar set-up had a failure of an attachment point, something broke and allowed the cross brace to drop down in to the lugs on the rear knobby tire and locked the rear wheel causing him to crash. Fortunately he only suffered some bruises and nothing more serious.
I am probably going to use the E-41's on my Tenere when it arrives. I've already purchased the SWmotech mounting hardware, the rear cross brace on it crosses outside the rear fender and mounts to the license plate bracket.

 

[colorider]

Here is something to consider, I think the rear cross brace for the Givi hardware to support the side bags crosses inside the rear fender and does not attach to the bike, only to each of the 2 side mounting brackets.
Just last week a friend with a similar set-up had a failure of an attachment point, something broke and allowed the cross brace to drop down in to the lugs on the rear knobby tire and locked the rear wheel causing him to crash. Fortunately he only suffered some bruises and nothing more serious.
I am probably going to use the E-41's on my Tenere when it arrives. I've already purchased the SWmotech mounting hardware, the rear cross brace on it crosses outside the rear fender and mounts to the license plate bracket.

You are correct. This was one of the reasons I chose the SW-Motech mount over the Givi for the side cases.

 

[hANNAbONE]

Here is something to consider, I think the rear cross brace for the Givi hardware to support the side bags crosses inside the rear fender and does not attach to the bike, only to each of the 2 side mounting brackets.
Just last week a friend with a similar set-up had a failure of an attachment point, something broke and allowed the cross brace to drop down in to the lugs on the rear knobby tire and locked the rear wheel causing him to crash. Fortunately he only suffered some bruises and nothing more serious.
I am probably going to use the E-41's on my Tenere when it arrives. I've already purchased the SWmotech mounting hardware, the rear cross brace on it crosses outside the rear fender and mounts to the license plate bracket.

Bob...can you direct me into the actual part numbers for the E41 mounting install components please.

TIA

 

[colorider]

The Givi PLR-367 side mounts for the SuperT work for ALL Givi Monokey bags - including the E41's.

 

[justbob]

heres a link to the swmotech hardware

http://www.twistedthrottle.com/trade/productview/5690/821/

 

[switchback]

For the GIVI topbox you may want to consider the AltRider rear rack with the optional GIVI mount. Not a plate like GIVI sells and no adapter plate like on the SW Motech rear rack. The most sanitary set-up if you are willing to shell out $200. No opinion on the sideracks as I have Micatechs and no bike yet to mount them.