Hyper-lites install?

[motorider]

I have a set of Hyper-lites I'm wanting to install on the S10. My problem is locating the wiring for brake lights and turn signals. Wondering if anyone here has installed a set on their S10. I got a Service manual but it doesn't tell how to access the wiring. I suppose I could find them up front on the right near the fuse block but would prefer at the rear near the brake light. Any suggestions?

 

[Ron15S10]

This http://www.yamahasupertenere.com/index.php?topic=1500.15 may help.

 

[Big Blu]

Remove the front seat and the set locking mechanism attached to the frame. You'll find a connector tucked into a neoprene sleeve along the right sine of the frame. Sorry I don't remember the color of the brake light wire but there's only a couple of wires in that bundle so it will be easy to isolate the brake light wire.

Paul

 

[sparkyduc]

I tied in to the harness in the tail section under the rear seat. I also put a 3rd hyperlite, the larger one under my license plate & tied into same controller. Really nice!

 

[motorider]

Thanks for the replies....will get into this this afternoon.

 

[motorider]

Got the Hyper-lites installed today and they work great. Thanks for the help guys.