Horn not working

[TenereStreets]

I car came into my lane today and when I pushed on the horn nothing happened. I just checked for a blown fuse and there wasn't one. Has this happened to anyone else? Any suggestions?
Bike's a 2014 Std.

 

[rotortech71]

Make sure the two terminals on the horn are still connected. Maybe one of the wires came off?

 

[Juan]

If the connections to the horn are good and the fuse is not blown, then check if there is current flowing to the terminals when the horn button is pressed (use a multi meter or a small wattage 12 volt bulb). If there is current then the horn has had it. If there is no current you would need to trace the wiring back. Are you sure you're checking the right fuse?

 

[Dogdaze]

As per replies, check connections and fuse again, can't imagine a horn being defective (but not rare), as it's the least used part of any bike ::001::

 

[Super10NJ]

Funny enough I never use my horn, but was messing around in the driveway and discovered it didn't work. I have a 2014 still under warranty and received a new one.

 

[Mikeybikey57]

If it does turn out to be the horn that's faulty, maybe you can throw it away and replace it with one that other road users can actually hear. O

 

[La Knee]

I just replaced mine with a $7 wolo horn from Ebay . There is an adjustment screw on the horn

 

[Checkswrecks]

Put a sticker on the back: