Highway Dirtbikes handguards

[BWC]

Anyone useing this set up on their Tenere with stock bars?
Have been looking for handguard options and these came up. Looks like they spread the load in case of a drop, to the handlebar top clamp pretty good. Bar top clamp can be gotten in a few styles predrilled for switchs etc.
Waiting to hear back regarding fitment.
Bernie

 

[yammy hammer]

BWC

I installed these on my bike, the problem is the master cylinders are too big. I had to put a spacer between the bark buster and the billet clamp to clear master cylinders. I really like mine . there very strong and the wind gaurds work good.

 

[Reveille]

You could also add the LED turn signal kit to these and eliminate the floppy front turn signals ::008:: HDB makes top notch stuff.

 

[bloodline]

You could also add the LED turn signal kit to these and eliminate the floppy front turn signals ::008:: HDB makes top notch stuff.

Friend of mine did on KTM 450. First drop trashed the integrated turn signals with no other damage.

I'll also add that in the 4 or 5 times I've dropped the S10, only once did a handguard (stock) even hit the ground and it came up slighty scratched. I think if you are dropping a S10 with crash bars hard enough to need barkbusters, you're going to have much bigger problems...

 

[terryth]

Yep, this is not an enduro bike, the stock ones are actually fairly sturdy and did there job with only scratches the times I have dumped it on Arkansas Ozark Mtn atv trails. Riding an ST at the speeds on off-road terrain you would easily ride on a real dirt bike is a good way to commit suicide

Friend of mine did on KTM 450. First drop trashed the integrated turn signals with no other damage.

I'll also add that in the 4 or 5 times I've dropped the S10, only once did a handguard (stock) even hit the ground and it came up slighty scratched. I think if you are dropping a S10 with crash bars hard enough to need barkbusters, you're going to have much bigger problems...