Help in locating part number

Squibb

Active Member
Joined
Aug 10, 2014
Messages
617
Location
Bedford, UK
I'm drawing a similar blank, looking at Fowlers UK parts diagrams.

What is wrong with your existing harness - can it not be rewired if necessary? ............. or maybe buy the ebay item?
 

EricV

Riding, farkling, riding...
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
May 22, 2011
Messages
7,328
Location
Tupelo, MS

SkunkWorks

Well-Known Member
Joined
Sep 13, 2018
Messages
356
I am trying to locate the part number for the wire harness that goes on top of the fork for the ES model. I am looking at the online diagrams and can't find it without any doubt. I see number 22 and 25 in the Electrical 2 but won't put a dime on it.

2016 ES

probably looking like this : https://www.ebay.ca/itm/14-Yamaha-XT1200ZE-Super-Tenere-Front-Fork-Sub-Wiring-Harness/383382376837
I can tell you that #22 and #25 (in diagram Electrical-2) are the same part, except that #25 shows to have had a few design changes. The "updated" part would be #25

If your fork connectors look like this, then your part number is: 2KB-82509-10-00

harness2.JPG
harness1.JPG
 

klingklang

Member
Joined
Oct 26, 2016
Messages
104
Location
Quebec, Canada
I can tell you that #22 and #25 (in diagram Electrical-2) are the same part, except that #25 shows to have had a few design changes. The "updated" part would be #25

If your fork connectors look like this, then your part number is: 2KB-82509-10-00
Thank you very much sir

Far out!!! What happened there?
some light grinding work ignited the tarp that covered it

20200315_151704 (Medium).jpg
20200315_151713 (Medium).jpg
20200318_112108 (Medium).jpg
20200316_162704 (Medium).jpg
 

SkunkWorks

Well-Known Member
Joined
Sep 13, 2018
Messages
356
Darn!
Hopefully you get it all sorted and cleaned-up.
Please show us some pictures after you finish putting her back together.
 

klingklang

Member
Joined
Oct 26, 2016
Messages
104
Location
Quebec, Canada
By the way, as I posted in the marketplace, If somebody has a non working dashboard with the housings intact for a transplant, let me know. Yam has only the top housing part and I need the bottom also. It irritates me to pay that much for a whole new one just because the housing is a bit melted. The numbers written on it are truly mine, not someone else or to start back to zero. I want mine! ....
 
Top