GPS mount

[LittleWalleez]

Where's the best place you've found to mount a gps? On the hanlebars? the windscreen mount? How's the vibration?

I need to mount my garmin 610 and have a ram mount. Curious about everyones experiences with this! :question:

 

[bigbob]

Where's the best place you've found to mount a gps? On the hanlebars? the windscreen mount? How's the vibration?

I need to mount my garmin 610 and have a ram mount. Curious about everyones experiences with this! :question:

actually no idea why I have this pic! But I like it on the bar with ram mount. Solid and easy to reach. Not in the way of instruments or single track right in front.

 

[Nikolajsen]

Me too. I just made a special bracket, where the cradle is directly monted.

 

[RCinNC]

Mine is mounted to the accessory bar on the windshield mount. There's too much vibration without some sort of reinforcement to the mount, so I got a set of reinforcing bars from a member on the forum (Propsoto). The cradle for the GPS is a RAM cradle (the GPS is a Nuvi 2455). It's attached to the accessory bar with the standard RAM double socket, and a homemade ball mount. I did modify the adjustment knob of the RAM double socket so it would be easier to tighten; it's a little confined in the space between the mount and the windshield to get my hand in there. The GPS plugs into a USB port on a homemade shelf mounted above the instrument pod; I made a bracket that allows me to screw the USB power cable from the GPS into the USB outlet, so it won't come loose from vibration while riding.

 

[2daMax]

Here is a DIY bar for Gen1 S10.

Made of AL sheet metal frame and plastic water pipes with end caps riveted to the AL frame.

 

[Stef]

I've got my Zumo and a cellphone cradle on my accessory bar. They're rock solid.

 

[Hfjeff]

I used a TechMount directly on the handlbars in the middle and it was perfect and solid. However I just installed a Helibar riser block and can no longer mount here. So I am looking at the cross member of the Madstad bracket.

 

[EVLED]

I've got the SW-Motec vibration damped jobbie. I had to make up a little plate to raise the GPS cradle up a bit higher so that the dash wasn't obscured:

 

[fredz43]

I've got my Zumo and a cellphone cradle on my accessory bar. They're rock solid.

Greetings, Where did you get those 2 gadgets that clamp to the accessory bar? I want to locate the display for my TPMS there.

Thanks.

 

[Stef]

Greetings, Where did you get those 2 gadgets that clamp to the accessory bar? I want to locate the display for my TPMS there.

https://www.rammount.com/part/RAM-B-408-37-62U

 

[fredz43]

https://www.rammount.com/part/RAM-B-408-37-62U

Thank you.