Givi Airflow discontinued?

[pvwheeler]

I'm beginning to wonder if the Givi airflow windshield has been discontinued? I cant seem to find one anywhere for my new to me 2016.
I hope not, I've used them on four different bikes and been very happy with each of them....

 

[okiegtrider]

GIVI AF447 Airflow Windshield - XT1200Z Super Tenere

www.advmotorrad.com

 

[pvwheeler]

Yeah that one says pre order down at the bottom too. Thx though! Maybe everyone is just out of stock. Found a couple on eBay in Europe. May have to go that route...

 

[Eville Rich]

The link shows it as being for the 2011 to 2013 (Gen1). My understanding is that the mounting holes do not line up between the two generations. I'm not sure that Givi ever made an Airflow for the Gen2, but I could be mistaken on that. I think some have drilled holes to get it to fit on Gen2 and reported positive results. Just FYI and allow I may be out of date on my understand of what Givi offers for the Gen2.

Eville Rich
2016 S10

 

[Strummer]

Parabrezza Altezza Regolabile GIVI Airflow Trasparente Yamaha XT 1200 Z Super Tenere 2010 - AF447

Parabrezza Altezza Regolabile GIVI Airflow Trasparente Yamaha XT 1200 Z Super Tenere 2010 , AF447, Cupolini plexi parabrezza, da Givi, GIVI AIRFLOW - PARABREZZA E SPOILER Parabrezza scorrevole specifico AIRFLOW trasparente per Yamaha XT1200Z Super Tene...

www.omniaracing.net

 

[Strummer]

If it is the airflow that he is after I think it would not matter if it's gen 1 or 2 because it gets fitted on top...
I might be wrong though

 

[MIKE R]

The Givi AirFlow is no longer being advertised on the Givi website in the UK although they are still available on eBay.

The AirFlow was designed for the Gen 1 bikes but can be adapted for the Gen 2

To do this I did the following:-

1 Remove the screen adjustment scaffolding which will mean you will lose the Sat Nav bar

2 Make/source 2 spacers to bring out the bottom of the screen. In the UK I used plastic number plate nuts

3 Source longer bolts. I think you only need these for the bottom pair but I could be wrong. Stainless steel off eBay for me

5 If cosmetics are important to you, you might want to source the two black plastic strips on the Gen 1 bikes that hides the screen holes

A great modification IMHO









Mike

 

[DigiPaul]

I had the same experiance. Not avalable by different stores. I found a used one.

 

[Sweden]

The Givi AirFlow is no longer being advertised on the Givi website in the UK although they are still available on eBay.

The AirFlow was designed for the Gen 1 bikes but can be adapted for the Gen 2

To do this I did the following:-

1 Remove the screen adjustment scaffolding which will mean you will lose the Sat Nav bar

2 Make/source 2 spacers to bring out the bottom of the screen. In the UK I used plastic number plate nuts

3 Source longer bolts. I think you only need these for the bottom pair but I could be wrong. Stainless steel off eBay for me

5 If cosmetics are important to you, you might want to source the two black plastic strips on the Gen 1 bikes that hides the screen holes

A great modification IMHO

View attachment 89647


View attachment 89648


View attachment 89650

Mike

Hi Mike.
Where did you get your stickers?
//Jonny

 

[MIKE R]

Hi Jonny

UK eBay

Good quality and a lot cheaper than Yamaha decals





They also do other colours

Bimota put me onto these.......he has red decals on his bike

Hope this helps

Mike

 

[bimota]

yes ebay italy they ship round the world really good 3d gel resin4bikes

 

[Sweden]

Ok. Thank you very much.

 

[Don in Lodi]

Already mentioned, but all the Gen I mounting hardware is under all the extra stuff put on for the Gen II adjustable. Lots of folks like their Madstadt systems, screen and adjuster, if Givi is a no go.

 

[Longdog Cymru]

Can anyone give me the part number or sell me a pair of the black plastic trims for the Gen 1 screen please? I have the Airflow on my Gen 2, (it was Mike R who gave me the heads up) and it is the best screen I have ever had on my S10

 

[Jdubco]

Can anyone give me the part number or sell me a pair of the black plastic trims for the Gen 1 screen please? I have the Airflow on my Gen 2, (it was Mike R who gave me the heads up) and it is the best screen I have ever had on my S10

each side is different but its these two

 

[pvwheeler]

Well I broke down and ordered a new old stock one from England. Here's hoping it gets here eventually lol