Full arrow goodness

[Fltrooper]

Nice write up! Perhaps I missed it but When you installed the arrow headers did you reuse the copper gasket/seals?


::003::

 

[Rasher]

Nice write up! Perhaps I missed it but When you installed the arrow headers did you reuse the copper gasket/seals?

When I fitted mine I did not buy any new exhaust gaskets or seals, or more to the point did not have time to go and get some, got away with it, nothing blows.

 

[Fltrooper]

When I fitted mine I did not buy any new exhaust gaskets or seals, or more to the point did not have time to go and get some, got away with it, nothing blows.

So you just reused the round oem gaskets/seals?

Thanks ::003::

 

[greg the pole]

So you just reused the round oem gaskets/seals?

Thanks ::003::

I reused the oem. have a bit of popping on decel around 3500rpm
otherwise a ok

 

[Fltrooper]

::015::

I reused the oem. have a bit of popping on decel around 3500rpm
otherwise a ok

10-4... The popping seems normal. I noticed latley I haven't been getting good gas mileage so I pulled my headers off looking for a leak and noticed I installed them without the seals! I found one seal on the skid plate and can't locate the other. I just ordered two new ones so hopefully this solves my problem!

 

[greg the pole]

::015::
10-4... The popping seems normal. I noticed latley I haven't been getting good gas mileage so I pulled my headers off looking for a leak and noticed I installed them without the seals! I found one seal on the skid plate and can't locate the other. I just ordered two new ones so hopefully this solves my problem!

the gas mileage is proportional to the fun you're having. Twist more burn more ::001::