rbm
New Member
First sorry if this should of been in a different topic as new here.
My S10 a 2013 model has just 11,000km and recently noticed if going slow and straight on a smooth surface it takes a bit of pressure to veer left or right using the bars. Initially put this down to new tires how ever as was pretty extreme thought best check it. While on main stand had someone on rear so front wheel free. Sure enough when moving wheel there is a gruve if one turnswheel slowly from a straight line. Extremely noticbly, almost like a wedge.
Unfortunately I reside in a rural area here in Philippines and no dealer available. My mechanic is pretty clued up how ever, any tips on replacing same would be appreciated indeed as I have no mechanical knowledge. Am having new bearings sent out from NZ, Japanese bearings. (At least know not buy Chinese)
Mods please change the placement of this post if necessary. Thanks in advance.
My S10 a 2013 model has just 11,000km and recently noticed if going slow and straight on a smooth surface it takes a bit of pressure to veer left or right using the bars. Initially put this down to new tires how ever as was pretty extreme thought best check it. While on main stand had someone on rear so front wheel free. Sure enough when moving wheel there is a gruve if one turnswheel slowly from a straight line. Extremely noticbly, almost like a wedge.
Unfortunately I reside in a rural area here in Philippines and no dealer available. My mechanic is pretty clued up how ever, any tips on replacing same would be appreciated indeed as I have no mechanical knowledge. Am having new bearings sent out from NZ, Japanese bearings. (At least know not buy Chinese)
Mods please change the placement of this post if necessary. Thanks in advance.