fabman
New Member
I,m not able to find an accessory plug on my Super T like the ones on a T7. I'm needing to tap a trigger wire for my Denali D3 fog lamps. Any suggestions?
Fog Lamps
- Thread starter fabman
- Start date
You want the accessories plug location for the fog lamps. If you search on here you will find lots of info. Although it's often easier with Google as you can use Boolean Statements which are more specific.
This is what you are looking for.
This is what you are looking for.
Accessories Wiring.
Hi, I have been told there are a number of accessories wiring points already on the xt1200. Is the correct, if so does anyone have pictures or diagrams showing where this is? Thanks in advance. Allen
yamahasupertenere.com
WJBertrand
Ventura Highway
Keep looking, it’s there. Forward of the battery buried behind the harnesses.
Sent from my iPhone using Tapatalk Pro
fabman
New Member
Thanks for the pictures and the input. I found the accessory plug with a blanked off female connector. My Tenere is a 2019 and the 3 wire port was tucked in just above the tool kit. No wiring is on the left side. I used a female pig tail I got off ebay. The yellow wire in this photo is comming out of that pig tail and actually connects to the brown wire in the factory acc plug which is only hot when the key is on.
The white wire is the trigger wire from the Denali harness. The blue quick connector was temporary just to see if switch and lights operated correctly. Cut the black and red off slightly shorter than the yellow and folded backward with shrink wrap; soldered trigger wire and shrink wrapped. Baada bing Baada boom! Bracket for lights will arrive tomorrow and I will post a finished picture,
The white wire is the trigger wire from the Denali harness. The blue quick connector was temporary just to see if switch and lights operated correctly. Cut the black and red off slightly shorter than the yellow and folded backward with shrink wrap; soldered trigger wire and shrink wrapped. Baada bing Baada boom! Bracket for lights will arrive tomorrow and I will post a finished picture,
Attachments
Hello all.
I'm putting Denali D4s with data dim on my 2014 Tenere. Simple as 1 constant live 1 earth and 1 switch live . I purchased a connection pack from Ali Express and plugged straight into the spare 3 pin connector. I have to tap into the main beam wire so the LED's can switch from half intensity to full. I believe I've read on here somewhere that the wire I'm looking for is pink . Can anyone help with the info or a wiring diagram . Thanks from Oz
I'm putting Denali D4s with data dim on my 2014 Tenere. Simple as 1 constant live 1 earth and 1 switch live . I purchased a connection pack from Ali Express and plugged straight into the spare 3 pin connector. I have to tap into the main beam wire so the LED's can switch from half intensity to full. I believe I've read on here somewhere that the wire I'm looking for is pink . Can anyone help with the info or a wiring diagram . Thanks from Oz
robp
Active Member
DENALI Electronics - LED Lights, CANsmart Controllers, Horns, & More
DENALI Electronics build vehicle specific solutions for your LED lighting needs. From Jeeps and trucks to motorcycles, ATV's, and snowmobiles, we've got something for you.
denalielectronics.com
Check out the AliExpress site I was able to get a small box of assorted plugs.
Thanks for the reply . The diagrams on the site actually are also included in the light package. I'm after the wiring diagram for the bike.Click the Resources tab then Wiring Guides from the dropdown selection for different wiring options.DENALI Electronics - LED Lights, CANsmart Controllers, Horns, & More
DENALI Electronics build vehicle specific solutions for your LED lighting needs. From Jeeps and trucks to motorcycles, ATV's, and snowmobiles, we've got something for you.