Cruise not working
- Thread starter ThaiXT
- Start date
TenereStreets
Active Member
Hello, There was a time cruise control wouldn't work on mine and it was due to the rear brake switch. Once that was replaced, it worked.
thughes317
Well-Known Member
dreaded cruise control issue
I've read as much as I could on this issue (blinking yellow cruise light), but haven't gathered too much info. The dealership changed out the rear brake switch and it worked for about 6 hours (one stint on the interstate). After that, it started blinking again. I attempted to adjust the rear...
www.yamahasupertenere.com
Cruise Control Issue
Cruise Control Issue – I have been a Forum member for about 1½ years and I really appreciate all the good information about the Super Tenere found here on the Forum. Last year I ran into the cruise control issue that many other Forum members have posted about. The information on the Forum about...
www.yamahasupertenere.com
Cruise Control Problem Solved
Cruise Control would switch on but not "activate". I found the rear brake light was on permanently. I cured it by taking the rear brake switch apart and found a "corroded/broken spring inside, which meant the rear brake light stayed on when I used the rear brake. Replaced the spring and the...
www.yamahasupertenere.com
Cruise control
I recently bought a Super Tenere XT1200ZE. It is a 2015 model and I bought it from a private seller. The odometer is 40000 km and directly I drove to my normal (non Yamaha) workshop to get the 40000 km service done. On the way to the workshop i tried the cruise control and it worked normally...
www.yamahasupertenere.com
Cruise Control won’t engage!
2015 Super T, 11k miles, Ecu flashed several years ago by Anthony, have gps and led lights wired in. I’m looking for any advice on a cruise issue. Recently, my cruise refused to engage even though light is illuminated on dash and Brake is not engaged. I assumed it had something to do with...
www.yamahasupertenere.com
Cruise control fault
Hi, I've trawled the forum and tried most things, but my cruise control on my 2015 1200z is not working. I can get the orange light on, but when pressing 'set' is does nothing. I've checked the brake pedal, clutch and brake lever switches, applied contact cleaner to the cruise control switch...
www.yamahasupertenere.com
Cruise Control Problem 2016 Super Tenere
I'm having a minor problem with my cruise control. The instrument cluster icon will randomly start to flash, and when it does, I cannot set the cruise control. Turning it on and off has no impact, it will still flash and I will be unable to set the speed. In order to clear the problem, I have...
www.yamahasupertenere.com
Cruise control (intermittent failures)
My cruise control only works sometimes, but not all of the time. I rode the bike today. I turned the key on , waited for it to go through the brief cycle and a code of "090" is displayed. I turn the key off, pause, turn on the key, and it goes through the brief cycle and all looks normal. In...
www.yamahasupertenere.com
Cruise control
Hi all, I've had an issue with the cruise control on my 2014 S-10. Works then won't set. Light blinks? Can stop, turn off, restart then it works until it wants to blink again. Book says maybe a break sensor, but I have no idea. Any info would be Great, thanks.
www.yamahasupertenere.com
Flashing cruise light
After 50 weeks of S10 ownership, I had my first problem with the bike. The cruise light flashes and SET does not engage, sometime right from a standing start, and sometimes it will engage then kick off and begin flashing after riding for a bit. Since it's under warranty for 2 more weeks I took...
www.yamahasupertenere.com
etc., etc., etc...
Tip: The search function on this forum sucks hind titty. Use Google, make sure to include "yamaha supertenere" in the your search, and 99 of 100 results will point you back to this forum.
Thanks, I had the brake switch apart and it's all okI think it was because I cleared the codes
Thank you I had the rear switch apart cleaned regressed and reassembles still won't set ;-(
gv550
Well-Known Member
The cruise control problem and recall was related to the front brake switch, not the rear switch. The front switch can be carefully disassembled ( small plastic parts) but the problem is not obvious to the naked eye. It needs to be replaced with the latest part number switch.
gv550
Well-Known Member
60 would be the way to go.....
Mine has the latest switch on already I checked the chassis number on the recalls
Attachments
More update, they have checked the wiring to the ECU, all is ok set switch ok, set and ACC switch ok, fuse ok,reverted ECU back to standard, tested still not working.....
I just bought a used 2023 and I’m dealing with this issue. Brake light is on most of the time and Cruise control indicator flashes. I cleaned the brake levers with wd 40 but it didn‘t help. I’m not mechanically inclined so I really need to have a mechanic fix this unless it is a real easy fix and it sounds like you haven’t found a solution. I’m surprised this is an issue on a model that has been out for so many years.
WJBertrand
Ventura Highway
Going back to the first post, I'm wondering if clearing the codes with the ELM created the problem? The error code should disappear from the dash and the CEL should turn off as soon as you correct the error. It probably persists in the ECU's memory for some period but in most case even that will clear after some number of start cycles if the ECU doesn't see the error again. When I accidently swapped a coil connector with the throttle body, I just swapped them back and carried on. No need to clear the code (unless for some reason it persists after the correction) in most cases I think.
Update on cruise, I found the problem a wire had come off the throttle body shut off switch! All I did was remove the "rubber" from around the wiring and re-soldered it on, their soldering was terrible "just held on" so I did both wires, re- sealed with RTV only issue I had was removing the switch, the M3 pin was loctited and sheared off! So I had to drill it out and re-tap it :-( all good and works now 