Clearwater Darla Install

[airhead81]

I recently installed a set of Clearwater Darla LED's on my 2015. They are powered by a PDM60 with a 5 second on delay. The install was straight forward with one small exception. The directions are not entirely clear on how to locate the high beam wire that the system requires. If you are unfamiliar with the Clearwaters, they are dimable and go to full power when you hit the high beams.

The high beam wire is yellow in color and is found in the large bundle behind the right upper cover.

 

[airhead81]

Closer view

 

[airhead81]

The wiretap can protrude through the weep hole cut into the protective boot.

 

[airhead81]

Had to make a little room for all the wires to get down to the PDM60

 

[airhead81]

Everything tidied up.

 

[airhead81]

The volume knob (that's what they call it).

 

[airhead81]

View from the front.

 

[airhead81]

I am happy with the brightness of these lights and like the added visibility they give you. Turned all the way down, I have not had anyone flash their brights at me at night. When you hit the brights, they are blinding, even during the day.