I don't have the exact combination you are referring to, but here are some pictures of my home made Pelican setup. I started with a basic Touratech Rack, which is very nicely made and fits perfectly. I think it was $400.00. Then I purchased a pair of Touratech Bag Mounts, which work with the rack I bought. They were $62.00 each and not too difficult to mount. I then purchased a set of Pelican Storm cases in 36L size (IM2600). These were $110.00 each online. From there it was a simple matter of getting the cases lined up on the racks, drilling the holes and attaching the mounting pucks and hardware. The only thing extra I had to do was to get some plastic shim material (Tap Plastics, about $6.00 total) to level out the surface of the case where the Pucks get mounted. The Pelican case comes with two sections on the bottom which protrude about 1/8". The pucks have to sit on this part, and halfway on the lower part, if that makes sense. I had the shop cut the black plastic sheet to the perfect size then taped it into place while I was drilling the mounting holes. I got one bag set up just right, then used it as a template to drill the second bag, back to back. I did purchase the 36L bag liners from Caribou which arrived yesterday. The are very nice and well made. I also added some black locks which are all keyed the same. It was a fun project and saved a little money. I had fun doing it and the results were great. Removing the 4 locks takes about 5 seconds each, and removing the bags from the bike takes about 35 seconds each. All in all I am very pleased with the look and the functionality. The Reflective Tape I purchased from a local NAPA store. I think it's used for marking trailers. It costs about $8.00 per bag.