Back seat removal help needed.

[TimLaw]

I took off the back seat to see what it was about and when I went to put it back on, one of the two bolts would not go back in. This is odd. I tried both bolts and on the left side, it only goes in about 3 turns and gets stuck. I tried to look around to see what the problem was and can't find anything.

Does anyone have a clue?

 

[Wistrick]

I took off the back seat to see what it was about and when I went to put it back on, one of the two bolts would not go back in. This is odd. I tried both bolts and on the left side, it only goes in about 3 turns and gets stuck. I tried to look around to see what the problem was and can't find anything.

Does anyone have a clue?

try taking the seat back off and putting in the bolt...If it still won't go the threads may be buggered up....or something fell down in the hole.....

 

[TimLaw]

I got it back on but it didn't go in as easy as the other side. I tried both bolts with the seat off and something was making it hard to go in. I felt underneath and there is some type of device the bolt goes into that was semi loose which could have been the easy. Odd...but it's back in.

 

[Wistrick]

I got it back on but it didn't go in as easy as the other side. I tried both bolts with the seat off and something was making it hard to go in. I felt underneath and there is some type of device the bolt goes into that was semi loose which could have been the easy. Odd...but it's back in.

I take remove and replace mine all the time never had an issue....

 

[TimLaw]

I take remove and replace mine all the time never had an issue....

Hence my question...thought it was odd....

 

[dirtsailor]

I might be an anchor nut but be careful not to cross thread that stuff. I've removed mine a couple times and had no issue but since you said you tried both bolts my guess is improper alignment, threads are fu*ked or grit or grim in there? let me know what happenes. ::002::