Anyone got a Powerbronze flip screen?

[Swagger]

Have you got a Powerbronze flip screen? If so, is it any good? It's 550mm tall what width is it? If someone has one can you please take a pic of the OEM screen against it to see the true difference.

http://www.powerbronze.co.uk/4632248/818268/831916/FLIP---YAMAHA-XT1200Z-SUPER-TENERE-10-13-(550MM)---LIGHT-TINT.item

 

[tomatocity]

My OEM windshield is on loan.

Powerbronze

Top to Bottom = 21.0
Top portion = 10.0 - 13.0
Wings = 16.5 - 14.0
Bottom portion = 12.0 - 2.0

(inches)

 

[Swagger]

Thank you my man ... appreciate it ::008::

 

[tomatocity]

I have run this windshield in the lowest and highest position. I am not much for running windshields in the high position but this one does provide cleaner air for this 6' height, 32" inseam rider with the seat in the low position. This windshield does out perform the standard OEM windshield. Also wish the upper portion of the windshield was an 1" wider on both sides especially during the cold months. I also use 3/8"-1/2" spacers on the top fastener which moves the top of the windshield forward (I also did this with the OEM windshield). Surprisingly make a noticeable difference. An inexpensive good looking windshield that functions well. Powerbronze was very good to work with with cheap shipping to the USA.