altrider engine gaurd and acd skid plate?

[RangerBrad]

Hey fellas, just pure phased both and want to install after first oil change but is ce both are attached at front engine mount I thought Al might give me some advice as to best way to install and do i need longer bolts or odd size than what was provided to make both work in same mounting holes? All advice apreciated. Thanks' Brad

 

[RangerBrad]

Sorry fellas, I can type just alot of auto correct in that. I hope you got the meaning

 

[Don in Lodi]

Wow.
Many of us have replaced the two mounting bolts with studs. Thread washers and nuts down onto the crash bar over the motor mount, slide the ACD down to those nuts, place washers and nuts over the ACD. The thickness of the bars, washers, and nuts takes out the need for the spacers ACD sends along. From then on all you have to undo is those outer nuts and the bolts at the center stand to do oil changes. The size is 12mmx1.25 and 65mm long.

 

[Bryce]

You need this.... http://www.yamahasupertenere.com/index.php?topic=15540.msg241566#msg241566

 

[RangerBrad]

Thanks for the info fellas, do the studs need to be a certain metal? Can I just use the bolts that came with the acd until I can pick up some stud bolts? Thanks

 

[Chuck B]

Thanks for the info fellas, do the studs need to be a certain metal? Can I just use the bolts that came with the acd until I can pick up some stud bolts? Thanks

Material is not important. Of course you can use the supplied bolts...that's why ACD supplied them. Enjoy!