sigeye
Member
Hello all,
I know the ABS kill switch has been covered on here, but I didn't see a late/recent thread on the topic and I'm hoping you guys can help guide me to the best and simplest approach to doing this. I have a 2014 Super Tenere ES and I would like input and guidance on the following please.
Option# 1: Simple ABS kill switch that allows ABS to re-enable upon turning the bike off and then starting it back up.
Please help point me toward the easiest and most reliable solution for this. I would like the switch to be handlebar mounted near my left hand controls if possible. My goal is that it is easy to kill "on the fly". I don't mind having to stop, switch the bike off and then crank it back up to re-enable ABS.
Option# 2 (preferred): Simple ABS kill switch that ALSO kills traction control
If possible, I'd like this to work the very same was as the above but I would like it to simultaneously kill ABS AND traction control at the same time. Then I would go through the switching the bike off and cranking it back up to allow things to re-enable. My issue with the current method for disabling traction control is that I am always the odd duck that has to stop and hold buttons on my dash to disable traction control, meanwhile my buddies on their bikes just kill it while they're riding if they even have it at all.
I'm hoping for an Option# 2 method because often my buddies and I are high tailing along and suddenly we hit dirt/other where we instantly want to goof around or just explore, and I hate having to always stop and also only being able to kill traction control.
Thanks for the help.
I know the ABS kill switch has been covered on here, but I didn't see a late/recent thread on the topic and I'm hoping you guys can help guide me to the best and simplest approach to doing this. I have a 2014 Super Tenere ES and I would like input and guidance on the following please.
Option# 1: Simple ABS kill switch that allows ABS to re-enable upon turning the bike off and then starting it back up.
Please help point me toward the easiest and most reliable solution for this. I would like the switch to be handlebar mounted near my left hand controls if possible. My goal is that it is easy to kill "on the fly". I don't mind having to stop, switch the bike off and then crank it back up to re-enable ABS.
Option# 2 (preferred): Simple ABS kill switch that ALSO kills traction control
If possible, I'd like this to work the very same was as the above but I would like it to simultaneously kill ABS AND traction control at the same time. Then I would go through the switching the bike off and cranking it back up to allow things to re-enable. My issue with the current method for disabling traction control is that I am always the odd duck that has to stop and hold buttons on my dash to disable traction control, meanwhile my buddies on their bikes just kill it while they're riding if they even have it at all.
I'm hoping for an Option# 2 method because often my buddies and I are high tailing along and suddenly we hit dirt/other where we instantly want to goof around or just explore, and I hate having to always stop and also only being able to kill traction control.
Thanks for the help.