2014 ws adjuster on 2013 and prior?

[Tremor38]

Does anyone know if it will fit (bolt-on)? Was also considering a Tobinator.

 

[Karson]

Does anyone know if it will fit (bolt-on)? Was also considering a Tobinator.

This should get you started. Not necessarily bolt-on, but not impossible, either.

Parts Required to Retrofit 2014 Windshield Adjustment Mechanism to 2012-2013 Super Tenere:

Washer, Plate - (4) - 90202-05180-00
Nut - (4) - 90202-05180-00
Stay, Side - (1) - 2BS-2831U-00-00
Stay, Side - (1) - 2BS-2832U-00-00
Bushing - (4) - 90386-07MA2-00
Washer, Plate - (2) - 90202-07015-00
Bolt, Button Head - (2) - 92017-06016-00
Washer, Plate - (1) - 90201-06021-00
Gasket - (2) - 90430-12072-00
Washer, Plate - (4) - 90201-123F2-00
Stay, Guide 1 - (1) - 2BS-2831E-00-00
Nut, Adjusting - (1) - 2BS-26383-00-00
Cap - (1) - 2BS-28349-00-00
Stay, Main 1 - (1) - 2BS-2831R-00-00
Clip - (2) - 99080-03600-00
Bolt, Hex Socket - (4) - 90111-05021-00

 

[Arkyrider]

2014 Windshield Mechanism - checked on this a couple weeks ago, estimated total parts cost app $250.00 w/o windshield (if you wanted to change it as well).

 

[cbreakin]

I have the 2014, and although the adjustable windscreen is very nice you may be better off going with a Madstad or similar. The reason being, none of the windscreens designed for the pre 2014 bikes work with the new bracket. So far not too many options for aftermarket screens are available for the 2014. Some companies advertise a 2011-2014 screen, but they only fit the 2014 if you remove all of the parts listed in the above post thus returning the windscreen mount to the old design.